Menu
Back
  1. Products
  2. Automation technology - Data transmission
  3. M12-D
  4. M12 Male cable connector, Contacts: 4, shielded, moulded on the cable, IP67, Ethernet CAT5e, TPE, blue/green, 2 x 2 x AWG 24, 10 m
Part no.: 77 4529 0000 34704-1000

M12 Male cable connector, Contacts: 4, shielded, moulded on the cable, IP67, Ethernet CAT5e, TPE, blue/green, 2 x 2 x AWG 24, 10 m

M12-D, series 876, Automation Technology - Data Transmission
(Other lengths are available on request).
Compare product
Downloads
This male cable connector with screw locking and a pin count of 4 is according to its protection class IP67 Dust-tight and has complete protection against contact and protection against temporary immersion. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -40 °C/85 °C is this shielded M12-D coded male cable connector designed for both severe cold and severe heat. und has the UL approval. Due to the qualified rated voltage of 250 V and the rated current of 4,0 A it is perfectly tuned for its field of application. It complies with the type standard DIN EN 61076-2-101.
General features
Moreless
Part no. 77 4529 0000 34704-1000
Connector design Male cable connector
Type standard DIN EN 61076-2-101
Cable length 10 m (Other lengths are available on request).
Version Connector pin straight
Connector locking system screw
Termination moulded on the cable
Degree of protection IP67
Cross-sectional area 2 x 2 x AWG 24
Temperature range from/to -40 °C / 85 °C
Mechanical operation > 100 Mating cycles
Weight (g) 480
Rated voltage 250 V
Rated impulse voltage 2500 V
Rated current 4.0 A
Insulation resistance > 1010 Ω
Pollution degree 3
Transmission rate CAT 5
Overvoltage category II
Insulating material group I
EMC compliance shielded
Shield connection Shield on the threaded ring
Housing material PUR
Contact body material PUR
Contact material CuZn (brass)
Contact plating Au (gold)
Locking material Zinc die-cast nickel-plated
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number SCIP-number not available
eCl@ss 11.1 27-06-03-11
ETIM 9.0 EC002638
Low Voltage Directive 2014/35/EU (EN 60529:1991;EN 60204-1:2018)
RoHS Directive 2011/65/EU (EN 50581:2012)
Cable data
Moreless
Structure of the cable
Cable type Ethernet CAT5e
Cable diameter 6.6 mm
Cross section 2 x 2 x AWG 24
Sheath material TPE
Single-lead insulation PE
Single-lead structure AWG 24
Cable color blue/green
Electrical properties
Conductor resistance 55 Ω/Km (20°C)
Mechanical properties
Bending radius, fixed cable ≥ 5 x Ø
Bending radius, moving cable ≥ 10 x Ø
Bending cycles > 10 million
Permitted acceleration max. 2 m/s²
Travel distance, horizontal at 5 m/s² -> 5 m
Travel distance, vertical at 5 m/s² -> 5 m
Travel speed ≤ 200 m/min (5 m horizontal distance)
Thermal properties
Temperature range cable in move from/to -40 °C / 80 °C
Temperature range cable fixed from/to -40 °C / 80 °C
Other features
Halogen free no
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  4. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm).
Downloads
Data sheet
Data sheet 77 4529 0000 34704-1000
PDF
REACH
77 4529 0000 34704-1000
PDF
RoHS
77 4529 0000 34704-1000
PDF
China RoHS
77 4529 0000 34704-1000
PDF
Declaration of conformity, Low Voltage Directive
Declaration of conformity
Low Voltage Directive
PDF
UKCA declaration of conformity, Electrical Equipment
UKCA declaration of conformity
Electrical Equipment
PDF
Declaration of conformity, RoHS Directive
Declaration of conformity
RoHS Directive
PDF
UKCA declaration of conformity, UK-RoHS
UKCA declaration of conformity
UK-RoHS
PDF
CAD files
Select required format
M12-D
77 4529 0000 34704-1000