Menu
Back
  1. Products
  2. Automation technology - Voltage and Power Supply
  3. M18
  4. M18 Male panel mount connector, Contacts: 4, unshielded, THT, IP67, front fastened
Part no.: 09 0441 90 04

M18 Male panel mount connector, Contacts: 4, unshielded, THT, IP67, front fastened

M18, series 714, Automation Technology - Voltage and Power Supply
Compare product
Downloads
This male panel mount connector with screw locking and a pin count of 4 is according to its protection class IP67 Dust-tight and has complete protection against contact and protection against temporary immersion. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -25 °C/85 °C is this unshielded M18 male panel mount connector designed for both severe cold and severe heat. Due to the qualified rated voltage of 250 V and the rated current of 16,0 A it is perfectly tuned for its field of application.
General features
Moreless
Part no. 09 0441 90 04
Connector design Male panel mount connector
Version Connector pin straight
Connector locking system screw
Termination THT
Degree of protection IP67
Cross-sectional area 1.50 mm² / AWG 16
Temperature range from/to -25 °C / 85 °C
Mechanical operation > 50 Mating cycles
Weight (g) 10.76
Customs tariff number 85369010
Country of Origin DE
Rated voltage 250 V
Rated impulse voltage 4000 V
Rated current 16.0 A
Insulation resistance > 108 Ω
Pollution degree 3
Overvoltage category III
Insulating material group III
EMC compliance unshielded
Housing material PBT/PA
Contact body material PUR/PA
Contact material CuZn (brass)
Contact plating CuSnZn (Optalloy)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 6c969738-9642-4a82-b0a6-76bb583c88d5
eCl@ss 11.1 27-44-01-09
ETIM 9.0 EC003569
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
  4. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
Downloads
Data sheet
Data sheet 09 0441 90 04
PDF
REACH
09 0441 90 04
PDF
RoHS
09 0441 90 04
PDF
China RoHS
09 0441 90 04
PDF
CAD files
Select required format
M18
09 0441 90 04