Name: M8
Brand: binder
SKU: 09 3403 00 03

Illustration 09 3403 00 03 - M8 Male panel mount connector, Contacts: 3, unshielded, single wires, IP67/IP69K, M8x0.5 — Illustration

3D View 09 3403 00 03 - M8 Male panel mount connector, Contacts: 3, unshielded, single wires, IP67/IP69K, M8x0.5 — 3D View

Scale drawing 09 3403 00 03 - M8 Male panel mount connector, Contacts: 3, unshielded, single wires, IP67/IP69K, M8x0.5 — Scale drawing

Assembly instructions / Panel cut-out 09 3403 00 03 - M8 Male panel mount connector, Contacts: 3, unshielded, single wires, IP67/IP69K, M8x0.5 — Assembly instructions / Panel cut-out

Contact arrangement (Plug-in side) 09 3403 00 03 - M8 Male panel mount connector, Contacts: 3, unshielded, single wires, IP67/IP69K, M8x0.5 — Contact arrangement (Plug-in side)

There is a newer version of this article

Direct comparison old/new version

Automation Technology - Sensors and Actuators--Male panel mount connector_718_3_FS_6pol

76 6019 0111 00003-0200

M8 Male panel mount connector, Contacts: 3, unshielded, single wires, IP67/IP69K, UL, M8x0.5

M8, series 718, Automation Technology - Sensors and Actuators

Details

This male panel mount connector mit snap-in, schrauben Verriegelung and a pin count of 3 is according to its protection class IP67/IP69K Dust-tight and has complete protection against contact and protection against temporary immersion. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -40 °C/85 °C is this unshielded M8 male panel mount connector designed for both severe cold and severe heat. und has the UL approval. Due to the qualified rated voltage of 60 V and the rated current of 4,0 A it is perfectly tuned for its field of application. It complies with the type standard DIN EN 61076-2-104.

Moreless

Part no.	09 3403 00 03
Connector design	Male panel mount connector
Type standard	DIN EN 61076-2-104
Wire length	0.2 m (Standard 0.2m. Other lengths are available on request).
Version	Connector pin straight
Connector locking system	snap-in, screw
Termination	single wires
Degree of protection	IP67/IP69K
Cross-sectional area	0.25 mm² / AWG 24
Temperature range from/to	-40 °C / 85 °C
Mechanical operation	> 100 Mating cycles
Weight (g)	5.04
Customs tariff number	85369010

Moreless

Rated voltage	60 V
Rated impulse voltage	1500 V
Rated current	4.0 A
Pollution degree	3
Overvoltage category	II
Insulating material group	II
EMC compliance	unshielded

Moreless

Housing material	CuZn (Brass nickel plated)
Contact body material	PA black
Contact material	CuZn (brass)
Contact plating	Au (gold)
REACH SVHC	CAS 7439-92-1 (Lead)
SCIP number	92a0ecac-86cc-452c-81e0-5924dab5af4f

Moreless

eCl@ss 11.1	27-44-01-03
ETIM 9.0	EC003569

Report error on this page

General Disclaim Notice

The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.

Downloads

all (PDF)

Data sheet

Data sheet 09 3403 00 03