Menu
Back
  1. Products
  2. Miniature connectors
  3. M16 IP40
  4. M16 Male angled connector, Contacts: 5 (05-b), 4.0-6.0 mm, shieldable, solder, IP40
Part no.: 99 0141 10 05

M16 Male angled connector, Contacts: 5 (05-b), 4.0-6.0 mm, shieldable, solder, IP40

M16 IP40, series 682, Miniature Connectors
Compare product
Downloads
This male angled connector with screw locking and a pin count of 5 (05-b) is according to its protection class IP40 protected against solid foreign bodies and against access with a wire. No protection against water. It can be used in areas with a pollution degree of 1. In places where there is no or only slight, but non-conductive soiling. The pollution has no influence. With temperatures ranges of -40 °C/85 °C is this shieldable M16 IP40 male angled panel mount connector designed for both severe cold and severe heat. Due to the qualified rated voltage of 60 V and the rated current of 6,0 A it is perfectly tuned for its field of application. It complies with the type standard DIN EN 61076-2-106.
General features
Moreless
Part no. 99 0141 10 05
Connector design Male angled connector
Type standard DIN EN 61076-2-106
Version Connector pin angled
Connector locking system screw
Termination solder
Degree of protection IP40
Cross-sectional area max. 0.75 mm² / AWG 18
Cable outlet 4.0-6.0 mm
Temperature range from/to -40 °C / 85 °C
Mechanical operation > 500 Mating cycles
Weight (g) 34.78
Customs tariff number 85369010
Country of Origin DE
Rated voltage 60 V
Rated impulse voltage 500 V
Rated current 6.0 A
Insulation resistance ≥ 1010 Ω
Pollution degree 1
Overvoltage category I
Insulating material group III
EMC compliance shieldable
Shield connection cable clamp
Housing material Zinc die-cast nickel-plated
Contact body material PBT (UL94 V-0)
Contact material CuZn (brass)
Contact plating Ag (silver)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 0ac4a1e6-e7e3-4df3-b8a2-c2a848cc24a7
eCl@ss 11.1 27-44-01-02
ETIM 9.0 EC002635
Low Voltage Directive 2014/35/EU (EN 60204-1:2018;EN 60529:1991)
General Disclaim Notice
  1. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  2. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm).
Downloads
Data sheet
Data sheet 99 0141 10 05
PDF
REACH
99 0141 10 05
PDF
RoHS
99 0141 10 05
PDF
China RoHS
99 0141 10 05
PDF
Declaration of conformity, Low Voltage Directive
Declaration of conformity
Low Voltage Directive
PDF
UKCA declaration of conformity, Electrical Equipment
UKCA declaration of conformity
Electrical Equipment
PDF
CAD files
Select required format
M16 IP40
99 0141 10 05