Menu
Back
  1. Products
  2. Miniature connectors
  3. M16 IP67
  4. M16 Male panel mount connector, Contacts: 5 (05-a), unshielded, solder, IP67, UL
Part no.: 09 0115 09 05

M16 Male panel mount connector, Contacts: 5 (05-a), unshielded, solder, IP67, UL

M16 IP67, series 723, Miniature Connectors
Compare product
Downloads
This male panel mount connector with screw locking and a pin count of 5 (05-a) is according to its protection class IP67 Dust-tight and has complete protection against contact and protection against temporary immersion. It can be used in areas with a pollution degree of 1. In places where there is no or only slight, but non-conductive soiling. The pollution has no influence. With temperatures ranges of -40 °C/95 °C is this unshielded M16 IP67 male panel mount connector designed for both severe cold and severe heat. und has the UL approval. Due to the qualified rated voltage of 250 V and the rated current of 6,0 A it is perfectly tuned for its field of application. It complies with the type standard DIN EN 61076-2-106.
General features
Moreless
Part no. 09 0115 09 05
Connector design Male panel mount connector
Type standard DIN EN 61076-2-106
Version Connector pin straight
Connector locking system screw
Termination solder
Degree of protection IP67
Cross-sectional area 0.75 mm² / AWG 18
Temperature range from/to -40 °C / 95 °C
Mechanical operation > 500 Mating cycles
Weight (g) 10.69
Customs tariff number 85369010
Country of Origin DE
Rated voltage 250 V
Rated impulse voltage 1500 V
Rated current 6.0 A
Insulation resistance ≥ 1010 Ω
Pollution degree 1
Overvoltage category I
Insulating material group III
EMC compliance unshielded
Housing material Zinc die-cast nickel-plated
Contact body material PBT (UL94 V-0)
Contact material CuZn (brass)
Contact plating Au (gold)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 6e095a7a-dbd1-40af-9e82-66cfafd64e82
ETIM 9.0 EC003569
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  4. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
Downloads
Data sheet
Data sheet 09 0115 09 05
PDF
Data sheet, Data sheet 09 0115 09 05
Certificates
UL certificate
PDF, 955.00 KB
REACH
09 0115 09 05
PDF
RoHS
09 0115 09 05
PDF
China RoHS
09 0115 09 05
PDF
CAD files
Select required format
M16 IP67
09 0115 09 05