Part no.: 09 9764 70 04
Snap-In Female cable connector, Contacts: 4, 2.5-4.0 mm, unshielded, solder, IP40
Snap-In IP40, series 719, Subminiature Connectors
This female cable connector with snap-in locking system and a pin count of 4 is according to its protection class IP40 protected against solid foreign bodies and against access with a wire. No protection against water. It can be used in areas with a pollution degree of 1. In places where there is no or only slight, but non-conductive soiling. The pollution has no influence. With temperatures ranges of -25 °C/70 °C is this unshieldede Snap-In IP40 female cable connector designed for both severe cold and severe heat. Due to the qualified rated voltage of 60 V and the rated current of 3,0 A it is perfectly tuned for its field of application.
General features
MorelessPart no. | 09 9764 70 04 |
Connector design | Female cable connector |
Version | Connector socket straight |
Connector locking system | snap-in |
Termination | solder |
Degree of protection | IP40 |
Cross-sectional area | 0.25 mm² / AWG 24 |
Cable outlet | 2.5-4.0 mm |
Temperature range from/to | -25 °C / 70 °C |
Mechanical operation | > 100 Mating cycles |
Weight (g) | 1.30 |
Customs tariff number | 85369010 |
Country of Origin | DE |
Electrical parameters
MorelessRated voltage | 60 V |
Rated impulse voltage | 800 V |
Rated current | 3,0 A |
Insulation resistance | ≥ 1010 Ω |
Pollution degree | 1 |
Overvoltage category | II |
Insulating material group | III |
EMC compliance | unshielded |
Material
MorelessHousing material | PA |
Contact body material | PA |
Contact material | CuSn (bronze) |
Contact plating | Au (gold) |
REACH SVHC |
CAS 7439-92-1 (Lead) |
SCIP number | 1cd87190-69a5-4173-a40a-55fa1fb0a094 |
Classifications
MorelesseCl@ss 11.1 | 27-44-01-09 |
ETIM 9.0 | EC003569 |
Declarations of conformity
MorelessLow Voltage Directive | 2014/35/EU (EN 60204-1:2018;EN 60529:1991) |
General Disclaim Notice
- The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
- The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
Downloads