43 1834 135 03 | binder Size B Female power connector, Contacts: 2+PE, 6.0-8.0 mm, unshielded, screw clamp, IP40 without seal, Circuit E6

Menu

Menu

Part no.

My Cart

binder USA

Products
Automation technology - Solenoid valve connectors
Model B
Size B Female power connector, Contacts: 2+PE, 6.0-8.0 mm, unshielded, screw clamp, IP40 without seal, Circuit E6

Illustration 43 1834 135 03 - Size B Female power connector, Contacts: 2+PE, 6.0-8.0 mm, unshielded, screw clamp, IP40 without seal, Circuit E6 — Illustration

3D View 43 1834 135 03 - Size B Female power connector, Contacts: 2+PE, 6.0-8.0 mm, unshielded, screw clamp, IP40 without seal, Circuit E6 — 3D View

Component part drawing 43 1834 135 03 - Size B Female power connector, Contacts: 2+PE, 6.0-8.0 mm, unshielded, screw clamp, IP40 without seal, Circuit E6 — Component part drawing

Scale drawing 43 1834 135 03 - Size B Female power connector, Contacts: 2+PE, 6.0-8.0 mm, unshielded, screw clamp, IP40 without seal, Circuit E6 — Scale drawing

Contact arrangement (Plug-in side) 43 1834 135 03 - Size B Female power connector, Contacts: 2+PE, 6.0-8.0 mm, unshielded, screw clamp, IP40 without seal, Circuit E6 — Contact arrangement (Plug-in side)

Part no.	43 1834 135 03
Connector design	Female power connector
Version	Connector socket straight
Connector locking system	Central bolt
Termination	screw clamp
Degree of protection	IP40 without seal IP65 with seal, see accessories
Cross-sectional area	0.34-1.50 mm²
Cable outlet	6.0-8.0 mm
Temperature range from/to	-25 °C / 85 °C
Mechanical operation	> 50 Mating cycles
Additional information	Circuit E6
Weight (g)	19.20
Customs tariff number	85369010

Rated voltage	24 V
Rated impulse voltage	800 V
Rated current (40 °C)	10.0 A
Pollution degree	3
Overvoltage category	III
Insulating material group	III
EMC compliance	unshielded
Wiring	E6

Contact body material	PA (UL94 HB)
Contact material	CuSn (bronze)
Contact plating	Ni (nickel)
REACH SVHC	CAS 7439-92-1 (Lead)
SCIP number	a0f5ccb5-a4a8-473e-91d2-5ecd1fc496b2

eCl@ss 11.1	27-06-03-11
ETIM 7.0	EC001855

Report error on this page

General Disclaim Notice

The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
The user must take appropriate safety precautions to ensure that the connector cannot be accidentally disconnected. In addition, the user must ensure that the cable is suitably secured.

Downloads

Data sheet 43 1834 135 03

CAD files

Select required format