1. Products
  2. Automation technology - Solenoid valve connectors
  3. Model C
  4. Size C Female power connector, Contacts: 3+PE, 4.0-6.0 mm, unshielded, screw clamp, IP40 without seal
Part no.: 43 1932 004 04

Size C Female power connector, Contacts: 3+PE, 4.0-6.0 mm, unshielded, screw clamp, IP40 without seal

series 230, Automation Technology - Solenoid Valve Connectors
Available numbers of contacts
Compare product
General features
Part no. 43 1932 004 04
Connector design Female power connector
Version Connector socket straight
Connector locking system Central bolt
Termination screw clamp
Degree of protection IP40 without seal
IP65 with seal, see accessories
Cross-sectional area max. 0.75 mm² / AWG 18
Cable outlet 4.0-6.0 mm
Temperature range from/to -25 °C / 120 °C
Mechanical operation > 50 Mating cycles
Weight (g) 11.02
Customs tariff number 85369010
Rated voltage 250 V
Rated impulse voltage 800 V
Rated current (40 °C) 6.0 A
Pollution degree 3
Overvoltage category III
Insulating material group III
EMC compliance unshielded
Housing material PBT
Contact body material PA (UL94 HB)
Contact material CuSn (bronze)
Contact plating Ni (nickel)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number d74b4001-45c7-43d8-85f4-7da7ab6bbb5d
eCl@ss 11.1 27-06-03-11
ETIM 7.0 EC001855
Low Voltage Directive 2014/35/EU (EN 60204-1:2018;EN 60529:1991)
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  5. The user must take appropriate safety precautions to ensure that the connector cannot be accidentally disconnected. In addition, the user must ensure that the cable is suitably secured.
Data sheet
Data sheet 43 1932 004 04
43 1932 004 04
43 1932 004 04
China RoHS
43 1932 004 04
Declaration of conformity, Low Voltage Directive
Declaration of conformity
Low Voltage Directive
UKCA declaration of conformity, Electrical Equipment
UKCA declaration of conformity
Electrical Equipment
CAD files
Select required format
Model C
43 1932 004 04