Menu
Back
  1. Products
  2. Automation technology - Voltage and Power Supply
  3. 7/8"
  4. 7/8" Male cable connector, Contacts: 3, unshielded, moulded on the cable, IP68, UL, PUR, black, 3 x 1.50 mm², 10 m
Part no.: 77 1429 0000 50003-1000

7/8" Male cable connector, Contacts: 3, unshielded, moulded on the cable, IP68, UL, PUR, black, 3 x 1.50 mm², 10 m

7/8", series 870, Automation Technology - Voltage and Power Supply
Available numbers of contacts
(Other lengths are available on request).
Compare product
Downloads
This male cable connector with screw locking and a pin count of 3 is according to its protection class IP68 Dustproof and complete protection against contact. Protection against permanent submersion. Unless otherwise specified, protection up to 1 meter water depth. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -25 °C/80 °C is this unshielded 7/8" male cable connector designed for both severe cold and severe heat. und has the UL approval. Due to the qualified rated voltage of 300 V (600 V UL) and the rated current of 13,0 A it is perfectly tuned for its field of application.
General features
Moreless
Part no. 77 1429 0000 50003-1000
Connector design Male cable connector
Cable length 10 m (Other lengths are available on request).
Version Connector pin straight
Connector locking system screw
Termination moulded on the cable
Degree of protection IP68
Cross-sectional area 1.50 mm² / AWG 16
Temperature range from/to -25 °C / 80 °C
Mechanical operation > 100 Mating cycles
Weight (g) 213.00
Customs tariff number 85444290
Rated voltage 300 V (600 V UL)
Rated impulse voltage 2500 V
Rated current 13.0 A
Pollution degree 3
Overvoltage category II
Insulating material group I
EMC compliance unshielded
Housing material PUR
Contact body material PUR
Contact material CuZn (brass)
Contact plating Au (gold)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 46acbdf0-e1bc-4b8a-a146-579418e09aa7
eCl@ss 11.1 27-06-03-11
ETIM 9.0 EC002638
Low Voltage Directive 2014/35/EU (EN 60529:1991;EN 60204-1:2018)
Cable data
Moreless
Structure of the cable
Cable diameter 7.4 mm
Cross section 3 x 1.50 mm²
Sheath material PUR
Single-lead insulation TPM
Single-lead structure 82 x 0.15 mm
Cable color black
Mechanical properties
Bending radius, fixed cable ≥ 7.5 x Ø
Bending cycles 5 million
Permitted acceleration 5 m/s²
Travel distance, horizontal 20 m
Travel speed ≤ 300 m/min
Thermal properties
Temperature range cable in move from/to -20 °C / 80 °C
Temperature range cable fixed from/to -40 °C / 80 °C
Other features
Halogen free yes
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  5. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm).
Downloads
Data sheet
Data sheet 77 1429 0000 50003-1000
PDF
Data sheet, Data sheet 77 1429 0000 50003-1000
Certificates
UL certificate
PDF, 280.61 KB
REACH
77 1429 0000 50003-1000
PDF
RoHS
77 1429 0000 50003-1000
PDF
China RoHS
77 1429 0000 50003-1000
PDF
Declaration of conformity, Low Voltage Directive
Declaration of conformity
Low Voltage Directive
PDF
UKCA declaration of conformity, Electrical Equipment
UKCA declaration of conformity
Electrical Equipment
PDF
CAD files
Select required format
7/8"
77 1429 0000 50003-1000