Name: M12-L
Brand: binder
SKU: 86 5444 0000 00845

Illustration 86 5444 0000 00845 - M12 Female receptacle, Contacts: 5, unshielded, THR, IP68, UL — Illustration

3D View 86 5444 0000 00845 - M12 Female receptacle, Contacts: 5, unshielded, THR, IP68, UL — 3D View

Conductor layout 86 5444 0000 00845 - M12 Female receptacle, Contacts: 5, unshielded, THR, IP68, UL — Conductor layout

Scale drawing 86 5444 0000 00845 - M12 Female receptacle, Contacts: 5, unshielded, THR, IP68, UL — Scale drawing

Contact arrangement (Plug-in side) 86 5444 0000 00845 - M12 Female receptacle, Contacts: 5, unshielded, THR, IP68, UL — Contact arrangement (Plug-in side)

This female receptacle with screw locking and a pin count of 4+FE is according to its protection class IP68 Dustproof and complete protection against contact. Protection against permanent submersion. Unless otherwise specified, protection up to 1 meter water depth. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -40 °C/105 °C is this unshielded M12-L coded female receptacle designed for both severe cold and severe heat. UL Due to the qualified rated voltage of 63 V and the rated current of 16,0 A it is perfectly tuned for its field of application. It complies with the type standard DIN EN IEC 61076-2-111:2018-10 and VDE 0687-76-2-111:2018-10.

Moreless

Part no.	86 5444 0000 00845 Alternative part no.: 09 0642 100 05
Connector design	Female receptacle
Type standard	DIN EN IEC 61076-2-111:2018-10;VDE 0687-76-2-111:2018-10
Version	Connector socket straight
Connector locking system	screw
Termination	THR
Degree of protection	IP68
Temperature range from/to	-40 °C / 105 °C
Mechanical operation	> 100 Mating cycles
Weight (g)	0.00
Customs tariff number	85369010
Country of Origin	DE

Moreless

Rated voltage	63 V
Rated impulse voltage	1500 V
Rated current	16.0 A
Insulation resistance	> 10¹⁰ Ω
Pollution degree	3
Overvoltage category	III
Insulating material group	I
EMC compliance	unshielded

Moreless

Housing material	Zinc die-cast nickel-plated
Contact body material	PA (UL94 V-0)
Contact material	CuSn (bronze) / CuZn (brass)
Contact plating	Au (gold)
REACH SVHC	CAS 7439-92-1 (Lead)
SCIP number	fcb4b560-b96f-49d1-b9ed-0dda75f23dfe

Moreless

Approvals	UL

Moreless

eCl@ss 11.1	27-44-01-09
ETIM 9.0	EC003569

Moreless

Low Voltage Directive	2014/35/EU (EN 60204-1:2018 \| 2011/65/EU;EN 50581:2012 \| 2014/35/EU;EN 60529:1991)
RoHS Directive	2011/65/EU (EN 50581:2012)

Report error on this page

General Disclaim Notice

The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).

Downloads

all (PDF)

Data sheet

Data sheet 86 5444 0000 00845

PDF

download