Part no.: 09 0631 070 04
M12 Square male panel mount connector, Contacts: 4, unshielded, single wires, IP40, UL
M12-T, series 813, Automation Technology - Voltage and Power Supply
This square male panel mount connector with screw locking and a pin count of 4 is according to its protection class IP40 protected against solid foreign bodies and against access with a wire. No protection against water. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -40 °C/85 °C is this unshielded M12-T coded Vierkant-male panel mount connector designed for both severe cold and severe heat. und has the UL approval. Due to the qualified rated voltage of 63 V and the rated current of 12,0 A it is perfectly tuned for its field of application. It complies with the type standard DIN EN IEC 61076-2-111:2018-10 and VDE 0687-76-2-111:2018-10.
General features
MorelessPart no. | 09 0631 070 04 |
Connector design | Square male panel mount connector |
Type standard | DIN EN IEC 61076-2-111:2018-10;VDE 0687-76-2-111:2018-10 |
Version | Connector pin straight |
Connector locking system | screw |
Termination | single wires |
Degree of protection |
IP40 IP67 with seal, see accessories |
Cross-sectional area | 1.38 mm² / AWG 16 |
Temperature range from/to | -40 °C / 85 °C |
Mechanical operation | > 100 Mating cycles |
Weight (g) | 26.81 |
Customs tariff number | 85369010 |
Country of Origin | DE |
Electrical parameters
MorelessRated voltage | 63 V |
Rated impulse voltage | 1500 V |
Rated current | 12.0 A |
Pollution degree | 3 |
Overvoltage category | III |
Insulating material group | II |
EMC compliance | unshielded |
Material
MorelessContact body material | PA |
Contact material | CuZn (brass) |
Contact plating | Au (gold) |
REACH SVHC |
CAS 7439-92-1 (Lead) |
SCIP number | bdcd5933-9a2e-47f1-b05f-60769ca803cc |
Authorization/approvals
MorelessApprovals | UL |
Classifications
MorelesseCl@ss 11.1 | 27-44-01-09 |
ETIM 9.0 | EC003569 |
General Disclaim Notice
- The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
- Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
Downloads