Menu
Back
  1. Products
  2. Automation technology - Voltage and Power Supply
  3. M12-US
  4. M12 Male receptacle, Contacts: 2+PE, unshielded, solder, IP67, UL
Part no.: 09 2431 09 03

M12 Male receptacle, Contacts: 2+PE, unshielded, solder, IP67, UL

M12-US, series 815, Automation Technology - Voltage and Power Supply
Compare product
Downloads
This male receptacle with screw locking and a pin count of 2+PE is according to its protection class IP67 Dust-tight and has complete protection against contact and protection against temporary immersion. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -25 °C/85 °C is this unshielded M12-US male receptacle designed for both severe cold and severe heat and has the UL approval. Due to the qualified rated voltage of 250 V and the rated current of 4,0 A it is perfectly tuned for its field of application.
General features
Moreless
Part no. 09 2431 09 03
Connector design Male receptacle
Type standard DIN EN 61076-2-101
Version Connector pin straight
Connector locking system screw
Termination solder
Degree of protection IP67
Cross-sectional area 0.50 mm² / AWG 20
Temperature range from/to -25 °C / 85 °C
Mechanical operation > 100 Mating cycles
Weight (g) 0.93
Customs tariff number 85369010
Country of Origin DE
Rated voltage 250 V
Rated impulse voltage 2500 V
Rated current 4.0 A
Insulation resistance ≥ 1010 Ω
Pollution degree 3
Overvoltage category II
Insulating material group II
EMC compliance unshielded
Housing material PA
Contact body material PA
Contact material CuZn (brass)
Contact plating Au (gold)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 8b67fda3-4c60-492e-8d94-9bf96e8ca720
eCl@ss 11.1 27-44-01-09
ETIM 9.0 EC003569
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
Downloads
Data sheet
Data sheet 09 2431 09 03
PDF
Data sheet, Data sheet 09 2431 09 03
Certificates
UL certificate
PDF, 323.25 KB
REACH
09 2431 09 03
PDF
RoHS
09 2431 09 03
PDF
China RoHS
09 2431 09 03
PDF
CAD files
Select required format
M12-US
09 2431 09 03