1. Products
  2. Automation technology - sensors and actuators
  3. Connecting cords
  4. Connecting Cables Male cable connector - female cable connector, Contacts: 3, unshielded, moulded on the cable, IP67, UL, PVC, 3 x 0.34 mm², 3 m
Part no.: 77 3430 3405 20003-0300

Connecting Cables Male cable connector - female cable connector, Contacts: 3, unshielded, moulded on the cable, IP67, UL, PVC, 3 x 0.34 mm², 3 m

Available numbers of contacts
Compare product
General features
Part no. 77 3430 3405 20003-0300
Connector design Male cable connector - female cable connector
Cable length 3 m
Version Connecting cable
Connector locking system screw
Termination moulded on the cable
Degree of protection IP67
Cross-sectional area 0.34 mm² / AWG 22
Temperature range from/to -25 °C / 85 °C
Mechanical operation > 100 Mating cycles
Weight (g) 150.0
Customs tariff number 85444290
Rated voltage 60 V
Rated impulse voltage 800 V
Rated current (40 °C) 4.0 A
Pollution degree 3
Overvoltage category II
Insulating material group II
EMC compliance unshielded
Contact body material PUR
Contact material CuZn (brass)
Contact plating Au (gold)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 2470e2c6-2873-4383-9b2b-570ff781beb8
Cable data
Structure of the cable
Cable diameter 4.5 mm
Cross section 3 x 0.34 mm²
Sheath material PVC
Single-lead insulation PVC
Single-lead structure 42 x 0.10 mm
Mechanical properties
Bending radius, fixed cable ≥ 5 x Ø
Bending radius, moving cable ≥ 10 x Ø
Bending cycles > 2 million
Permitted acceleration max. 5 m/s² + 1 m/s²
Travel speed ≤ 200 m/min (5 m horizontal distance)
Thermal properties
Temperature range cable in move from/to -5 °C / 105 °C
Temperature range cable fixed from/to -40 °C / 105 °C
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  5. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  6. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
  7. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).
Data sheet
Data sheet 77 3430 3405 20003-0300
Certificates, UL certificate
UL certificate
PDF, 1.29 MB
77 3430 3405 20003-0300
77 3430 3405 20003-0300
China RoHS
77 3430 3405 20003-0300
CAD files
Select required format
Connecting cords
77 3430 3405 20003-0300