08 2434 400 001 | binder Adapter, unshielded, screwable from the front

Menu

Menu

Part no.

My Cart

binder USA

Products
Connectors for medical applications
Snap-in IP67, miniature
Adapter, unshielded, screwable from the front

Illustration 08 2434 400 001 - Adapter, unshielded, screwable from the front — Illustration

3D View 08 2434 400 001 - Adapter, unshielded, screwable from the front — 3D View

Component part drawing 08 2434 400 001 - Adapter, unshielded, screwable from the front — Component part drawing

Scale drawing 08 2434 400 001 - Adapter, unshielded, screwable from the front — Scale drawing

Assembly instructions 08 2434 400 001 - Adapter, unshielded, screwable from the front — Assembly instructions

Assembly instructions / Panel cut-out 08 2434 400 001 - Adapter, unshielded, screwable from the front — Assembly instructions / Panel cut-out

Part no.	08 2434 400 001
Connector design	Adapter
Version	Adapter
Additional information	screwable from the front
Weight (g)	7.43
Customs tariff number	85369010

EMC compliance	unshielded

Housing material	PA GF 25
REACH SVHC	CAS 7439-92-1 (Lead)
SCIP number	01d96e0a-534b-4384-b944-c4cbae8a0f87

eCl@ss 11.1	27-44-02-08
ETIM 9.0	EC002638

Report error on this page

General Disclaim Notice

The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.

Downloads

Data sheet 08 2434 400 001

08 2434 400 001

08 2434 400 001

08 2434 400 001

CAD files

Select required format