Menu
Back
  1. Products
  2. Connectors for medical applications
  3. Snap-in IP67, miniature
  4. Snap-In Female panel mount connector, Contacts: 12, unshielded, solder, IP67, VDE
Part no.: 99 9136 60 12

Snap-In Female panel mount connector, Contacts: 12, unshielded, solder, IP67, VDE

Snap-In IP67 (miniature), series 720, Connectors for medical applications
Available numbers of contacts
Compare product
Downloads
This female panel mount connector with snap-in locking system and a pin count of 12 is according to its protection class IP67 Dust-tight and has complete protection against contact and protection against temporary immersion. It can be used in areas with a pollution degree of 2. In places where light, non-conductive soiling may occur, but temporary conductivity due to condensation must be expected in some cases. With temperatures ranges of -25 °C/85 °C is this unshieldede Snap-In IP67 (Miniatur) female panel mount connector designed for both severe cold and severe heat and has the VDE approval. Due to the qualified rated voltage of 60 V and the rated current of 2,0 A it is perfectly tuned for its field of application.
General features
Moreless
Part no. 99 9136 60 12
Connector design Female panel mount connector
Version Connector socket straight
Connector locking system snap-in
Termination solder
Degree of protection IP67
Cross-sectional area max. 0.25 mm² / AWG 24
Temperature range from/to -25 °C / 85 °C
Mechanical operation > 500 Mating cycles
Weight (g) 6.243
Customs tariff number 85369010
Rated voltage 60 V
Rated impulse voltage 800 V
Rated current 2.0 A
Insulation resistance ≥ 1010 Ω
Pollution degree 2
Overvoltage category II
Insulating material group II
EMC compliance unshielded
Housing material PA
Contact body material PA (UL94 HB) blue
Contact material CuSn (bronze)
Contact plating Au (gold)
eCl@ss 11.1 27-44-01-02
ETIM 9.0 EC002635
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
  4. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  5. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
Downloads
Data sheet
Data sheet 99 9136 60 12
PDF
Data sheet, Data sheet 99 9136 60 12
Certificates
VDE certificate
PDF, 264.66 KB
REACH
99 9136 60 12
PDF
RoHS
99 9136 60 12
PDF
China RoHS
99 9136 60 12
PDF
CAD files
Select required format
Snap-in IP67, miniature
99 9136 60 12