Menu
Back
  1. Products
  2. Automation technology - Data transmission
  3. RJ45
  4. RJ45 connector, Contacts: 4, 5.0-9.0 mm, shieldable, Piercing technology, IP20
Part no.: 99 9647 810 04

RJ45 connector, Contacts: 4, 5.0-9.0 mm, shieldable, Piercing technology, IP20

RJ45, series 825, Automation Technology - Data Transmission
Available numbers of contacts
Compare product
Downloads
General features
Moreless
Part no. 99 9647 810 04
Connector design connector
Version Connector pin straight
Connector locking system lock
Termination Piercing technology
Degree of protection IP20
Cross-sectional area AWG 24-22/1, AWG 27-22/7
Cable outlet 5.0-9.0 mm
Temperature range from/to -40 °C / 85 °C
Mechanical operation > 750 Mating cycles
Connection standard TIA 568 Profinet
Weight (g) 25.34
Customs tariff number 85369010
Country of Origin DE
Rated voltage 50 V DC
Rated current 1.3 A
Pollution degree 2
Transmission rate CAT 6A
Overvoltage category III
Insulating material group IIIa
EMC compliance shieldable
Shield connection Shield clamping
Housing material Zinc die-cast nickel-plated
Contact body material PC
Contact material Spring steel
Contact plating Au (gold)
REACH SVHC None (No pollutants)
SCIP number SCIP-number not available
eCl@ss 11.1 27-44-01-02
ETIM 9.0 EC002635
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  5. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  6. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
  7. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).
Downloads
Data sheet
Data sheet 99 9647 810 04
PDF
REACH
99 9647 810 04
PDF
RoHS
99 9647 810 04
PDF
China RoHS
99 9647 810 04
PDF
CAD files
Select required format
RJ45
99 9647 810 04