Part no.: 77 9753 4527 64704-0500
M12/RJ45 Connecting cable male angled connector - RJ45 connector, Contacts: 4, shielded, molded/crimp, IP67, Ethernet CAT5e, TPE, black, 2 x 2 x AWG 24, 5 m
M12-D, series 876, Automation Technology - Data Transmission
3D View(Click to activate)
This female cable connector with male angled connector - RJ45 connector with screw locking and a pin count of 4 is according to its protection class IP67 Dust-tight and has complete protection against contact and protection against temporary immersion. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -40 °C/85 °C is this shielded M12-D coded connecting cable male angled panel mount connector - RJ45 connector designed for both severe cold and severe heat. Due to the qualified rated voltage of 50 V and the rated current of 1,5 A it is perfectly tuned for its field of application.
General features
Moreless| Part no. | 77 9753 4527 64704-0500 |
| Connector design | Connecting cable male angled connector - RJ45 connector |
| Cable length | 5 m (Other lengths are available on request). |
| Version | Connecting cable |
| Connector locking system | screw/lock |
| Termination | molded/crimp |
| Degree of protection | IP67 |
| Cross-sectional area | 2 x 2 x AWG 24 |
| Temperature range from/to | -40 °C / 85 °C |
| Mechanical operation | > 100 Mating cycles |
| Weight (g) | 540 |
Electrical parameters
Moreless| Rated voltage | 50 V |
| Rated impulse voltage | 1000 V |
| Rated current | 1.5 A |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | II |
| EMC compliance | shielded |
Material
Moreless| Contact body material | PUR |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| REACH SVHC |
CAS 7439-92-1 (Lead) |
| SCIP number | SCIP-number not available |
Classifications
Moreless| ETIM 9.0 | EC002638 |
Cable data
Moreless| Structure of the cable | |
| Cable type | Ethernet CAT5e |
| Cable diameter | 6.6 mm |
| Cross section | 2 x 2 x AWG 24 |
| Sheath material | TPE |
| Single-lead insulation | PE |
| Single-lead structure | AWG 24 |
| Cable color | black |
| Mechanical properties | |
| Bending radius, fixed cable | ≥ 5 x Ø |
| Bending radius, moving cable | ≥ 10 x Ø |
| Bending cycles | > 10 million |
| Travel distance, horizontal | at 5 m/s² -> 5 m |
| Travel distance, vertical | at 5 m/s² -> 5 m |
| Travel speed | ≤ 200 m/min (5 m horizontal distance) |
| Thermal properties | |
| Temperature range cable in move from/to | -40 °C / 80 °C |
| Temperature range cable fixed from/to | -40 °C / 80 °C |
General Disclaim Notice
- The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
- The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
- Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
- To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm).
Downloads
