Subminiature connectors
Filter products
Connector type
The connector type can be used to distinguish our products for installation in a device housing from cable parts. The connector type describes the difference between connectors that are mounted on enclosures and connectors that are mounted on cables.
A connector consists of the male part (pin) and the female part (socket). Depending on the design, the male or female part is either permanently installed or are located at the end of a cable.
Number of contacts
This indicates the number of contacts the connector has.
The choice of version allows the definition of certain technical specifications – for example the type of cable outlet or the size.
Locking Type
The locking system describes how the pin and socket elements are joined.
Rated voltage
The rated voltage is the electrical voltage assigned to the connector.
Rated current
The rated current is the electrical current that is assigned to the connector.
Degree of protection
The degrees of protection according to IEC60529 apply to various articles and provide information on protection against the intrusion of water and solids such as dust.
Shielded Option
Electromagnetic compatibility (EMC) means that a connector is shielded or shieldable. This is required when it is necessary to protect the signals or data conducted by the connector, as well as to protect external devices, from disturbance due to electromagnetic effects.
Material of housing
Depending on the area of application or requirements, connectors are made of different materials. We offer metal and plastic housings for our items as the housing material.
The termination type determines how cables, single wires or PCBs can be joined with the connector.
Our articles have various approvals which can be preselected here. can be preselected here.
Cable type
By selecting the cable type, a preselection for the respective application can be carried out.
Cable Jacket Type
The material of the cable jacket. PUR, TPE, TMPU or TPE-U cables each have different technical properties.
Cable color
The color of the cable jacket.
Cable length
Our items with molded or pre-assembled cables have different cable lengths. It describes the length of the cable from the end of the connector. If the desired cable length is not included, please contact our sales department.
Locking material
Depending on the technical requirements or performance data of the connector, the locking mechanism is made of plastic or metal.
  1. Products
  2. Subminiature connectors

Subminiature connectors

Our subminiature circular connectors are designed for the many applications where size and signal integrity are important. We offer models with snap, bayonet and push-pull locking, as well as M9 screw locking in two different versions, either IP40 or IP67. The connectors are available with two to eight contacts, in straight or angled versions and as flange connectors. The different models have a dip solder or solder connection and are available with moulded cables in different lengths. We use high-quality materials for the production of our circular connectors. The housing and contact bodies are made of PUR or PVC, the contacts are made of gold-plated bronze or gold-plated brass. There are seven different series available, which convince with the following advantages:

• Choice of locking mechanism
• Protection class IP40 or IP67
• 2 to 8 poles
• Straight and angled versions
• Up to 1,000 mating cycles

+1 805.437.9925