1. Products
  2. Automation technology - Solenoid valve connectors
  3. Model A
  4. Female power connector, Contacts: 2+PE, 8.0-10.0 mm, unshielded, screw clamp, IP40 without seal, Circuit P33, with LED PNP closer
Part no.: 43 1714 134 03

Female power connector, Contacts: 2+PE, 8.0-10.0 mm, unshielded, screw clamp, IP40 without seal, Circuit P33, with LED PNP closer

Size A, series 210, Automation Technology - Solenoid Valve Connectors
Compare product
This female power connector with central bolt locking system and a pin count of 2+PE is according to its protection class IP40 protected against solid foreign bodies and against access with a wire. No protection against water. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -25 °C/85 °C is this unshielded type A Gerätesteckdose designed for both severe cold and severe heat and has the approval. Due to the qualified rated voltage of 110 V and the rated current of 10,0 A it is perfectly tuned for its field of application. It complies with the type standard DIN EN 175301-803.
General features
Part no. 43 1714 134 03
Connector design Female power connector
Type standard DIN EN 175301-803
Version Connector socket straight
Connector locking system Central bolt
Termination screw clamp
Degree of protection IP40 without seal
IP65 with seal, see accessories
Cross-sectional area 0.34-1.50 mm²
Cable outlet 8.0-10.0 mm
Temperature range from/to -25 °C / 85 °C
Mechanical operation > 50 Mating cycles
Additional information Circuit P33
with LED PNP closer
Weight (g) 24.30
Customs tariff number 85369010
Country of Origin HU
Rated voltage 110 V
Rated impulse voltage 800 V
Rated current 10.0 A
Pollution degree 3
Overvoltage category III
Insulating material group III
EMC compliance unshielded
Wiring P33
Housing material PC
Contact body material PA (UL94 HB)
Contact material CuSn (bronze)
Contact plating Ni (nickel)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number ee9120d3-57fe-4226-99f7-f4735d483807
eCl@ss 11.1 27-06-03-11
ETIM 9.0 EC002635
Low Voltage Directive 2014/35/EU (EN 60204-1:2018;EN 60529:1991)
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  5. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  6. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
Data sheet
Data sheet 43 1714 134 03
43 1714 134 03
43 1714 134 03
China RoHS
43 1714 134 03
Declaration of conformity, Low Voltage Directive
Declaration of conformity
Low Voltage Directive
UKCA declaration of conformity, Electrical Equipment
UKCA declaration of conformity
Electrical Equipment
CAD files
Select required format
Model A
43 1714 134 03