Menu
Back
  1. Products
  2. Automation technology - Solenoid valve connectors
  3. Model A
  4. Male power connector, contacts angled inwards, Contacts: 3+PE, unshielded, solder, IP40 without seal, UL, ESTI+, VDE
Part no.: 43 1719 028 04

Male power connector, contacts angled inwards, Contacts: 3+PE, unshielded, solder, IP40 without seal, UL, ESTI+, VDE

Size A, series 210, Automation Technology - Solenoid Valve Connectors
Available numbers of contacts
Compare product
Downloads
This male power connector with central bolt locking system and a pin count of 3+PE is according to its protection class IP40 protected against solid foreign bodies and against access with a wire. No protection against water. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -25 °C/100 °C is this unshielded type A device plug, contacts angled inwards designed for both severe cold and severe heat and has UL, ESTI+, VDE approval. Due to the qualified rated voltage of 250 V and the rated current of 10,0 A it is perfectly tuned for its field of application. It complies with the type standard DIN EN 175301-803.
General features
Moreless
Part no. 43 1719 028 04
Connector design Male power connector, contacts angled inwards
Type standard DIN EN 175301-803
Version Connector pin straight
Connector locking system Central bolt
Termination solder
Degree of protection IP40 without seal
IP65 with seal, see accessories
Cross-sectional area 1.00 mm² / AWG 17
Temperature range from/to -25 °C / 100 °C
Mechanical operation > 50 Mating cycles
Weight (g) 10.57
Customs tariff number 85369010
Country of Origin HU
Rated voltage 250 V
Rated impulse voltage 4000 V
Rated current 10.0 A
Insulation resistance ≥ 1010 Ω
Pollution degree 3
Overvoltage category III
Insulating material group III
EMC compliance unshielded
Contact body material PA (UL94 HB)
Contact material CuZn (brass)
Contact plating Sn (tin)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number a63dcd71-92d0-411f-acd0-c56d6b104d52
Approvals UL, ESTI+, VDE
eCl@ss 11.1 27-06-03-11
ETIM 9.0 EC002635
Low Voltage Directive 2014/35/EU (EN 60204-1:2018;EN 60529:1991)
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  5. The user must take appropriate safety precautions to ensure that the connector cannot be accidentally disconnected. In addition, the user must ensure that the cable is suitably secured.
Downloads
Data sheet
Data sheet 43 1719 028 04
PDF
Data sheet, Data sheet 43 1719 028 04
Certificates
Splus certificate
PDF, 480.09 KB
Certificates, Splus certificate
Certificates
UL certificate
PDF, 1.17 MB
Certificates, UL certificate
Certificates
VDE certificate
PDF, 329.70 KB
REACH
43 1719 028 04
PDF
RoHS
43 1719 028 04
PDF
China RoHS
43 1719 028 04
PDF
Declaration of conformity, Low Voltage Directive
Declaration of conformity
Low Voltage Directive
PDF
UKCA declaration of conformity, Electrical Equipment
UKCA declaration of conformity
Electrical Equipment
PDF
CAD files
Select required format
Model A
43 1719 028 04