1. Products
  2. Automation technology - Data transmission
  3. RJ45
  4. RJ45/RJ45 Connecting cable 2 RJ45 connector, Contacts: 8, shielded, crimping, IP20, Ethernet CAT6a, TPE, green, 4 x 2 x AWG 24, 0.3 m
Part no.: 77 9753 9753 14708-0030

RJ45/RJ45 Connecting cable 2 RJ45 connector, Contacts: 8, shielded, crimping, IP20, Ethernet CAT6a, TPE, green, 4 x 2 x AWG 24, 0.3 m

RJ45, series 876, Automation Technology - Data Transmission
(Other lengths are available on request).
Compare product
This female cable connector with 2 RJ45 connector mit einer Polzahl von 8 is according to its protection class IP20 Protected against solid foreign bodies. No protection against water. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -40 °C/85 °C is this shielded M12-X connecting cable 2 RJ45 connector designed for both severe cold and severe heat. Due to the qualified rated voltage of 50 V and the rated current of 1,5 A it is perfectly tuned for its field of application.
General features
Part no. 77 9753 9753 14708-0030
Connector design Connecting cable 2 RJ45 connector
Cable length 0.3 m (Other lengths are available on request).
Version Connecting cable
Connector locking system lock
Termination crimping
Degree of protection IP20
Cross-sectional area 4 x 2 x AWG 24
Temperature range from/to -40 °C / 85 °C
Mechanical operation > 100 Mating cycles
Weight (g) 138
Rated voltage 50 V
Rated impulse voltage 1000 V
Rated current 1.5 A
Pollution degree 3
Overvoltage category II
Insulating material group II
EMC compliance shielded
Contact body material Polymid
Contact material CuZn (brass)
Contact plating Au (gold)
REACH SVHC None (No pollutants)
SCIP number SCIP-number not available
ETIM 9.0 EC002638
Cable data
Structure of the cable
Cable type Ethernet CAT6a
Cross section 4 x 2 x AWG 24
Sheath material TPE
Single-lead insulation HDPE
Cable color green
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  5. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  6. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
Data sheet
Data sheet 77 9753 9753 14708-0030
77 9753 9753 14708-0030
77 9753 9753 14708-0030
China RoHS
77 9753 9753 14708-0030
CAD files
Select required format
77 9753 9753 14708-0030