Part no.: 77 9753 9753 14708-0300
RJ45/RJ45 Connecting cable 2 RJ45 connector, Contacts: 8, shielded, crimping, IP20, Ethernet CAT6a, TPE, green, 4 x 2 x AWG 24, 3 m
RJ45, series 876, Automation Technology - Data Transmission
3D View(Click to activate)
This female cable connector with 2 RJ45 connector mit einer Polzahl von 8 is according to its protection class IP20 Protected against solid foreign bodies. No protection against water. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -40 °C/85 °C is this shielded M12-X connecting cable 2 RJ45 connector designed for both severe cold and severe heat. Due to the qualified rated voltage of 50 V and the rated current of 1,5 A it is perfectly tuned for its field of application.
General features
Moreless| Part no. | 77 9753 9753 14708-0300 |
| Connector design | Connecting cable 2 RJ45 connector |
| Cable length | 3 m (Other lengths are available on request). |
| Version | Connecting cable |
| Connector locking system | lock |
| Termination | crimping |
| Degree of protection | IP20 |
| Cross-sectional area | 4 x 2 x AWG 24 |
| Temperature range from/to | -40 °C / 85 °C |
| Mechanical operation | > 100 Mating cycles |
| Weight (g) | 300 |
Electrical parameters
Moreless| Rated voltage | 50 V |
| Rated impulse voltage | 1000 V |
| Rated current | 1.5 A |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | II |
| EMC compliance | shielded |
Material
Moreless| Contact body material | Polymid |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| REACH SVHC |
None (No pollutants) |
| SCIP number | SCIP-number not available |
Classifications
Moreless| ETIM 9.0 | EC002638 |
Cable data
Moreless| Structure of the cable | |
| Cable type | Ethernet CAT6a |
| Cross section | 4 x 2 x AWG 24 |
| Sheath material | TPE |
| Single-lead insulation | HDPE |
| Cable color | green |
General Disclaim Notice
- The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
- The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
- Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
- To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm).
Downloads
