Part no.: 09 2446 300 03
Female panel mount connector, Contacts: 2+PE, unshielded, single wires, IP68, UL, VDE, PG 13.5
7/8", series 820, Automation Technology - Voltage and Power Supply
This female panel mount connector with screw locking and a pin count of 2+PE is according to its protection class IP68 Dustproof and complete protection against contact. Protection against permanent submersion. Unless otherwise specified, protection up to 1 meter water depth. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -25 °C/85 °C is this unshielded 7/8" female panel mount connector designed for both severe cold and severe heat and has UL, VDE approval. Due to the qualified rated voltage of 300 V (600 V UL) and the rated current of 10,0 A it is perfectly tuned for its field of application.
|Part no.||09 2446 300 03|
|Connector design||Female panel mount connector|
|Version||Connector socket straight|
|Connector locking system||screw|
|Degree of protection||IP68|
|Cross-sectional area||0.75 mm² / AWG 18|
|Temperature range from/to||-25 °C / 85 °C|
|Mechanical operation||> 100 Mating cycles|
|Customs tariff number||85369010|
|Rated voltage||300 V (600 V UL)|
|Rated impulse voltage||4000 V|
|Rated current (40 °C)||10.0 A|
|Insulating material group||I|
|Housing material||Zinc die-cast nickel-plated|
|Contact body material||PUR|
|Contact material||CuZn (brass)|
|Contact plating||Au (gold)|
CAS 7439-92-1 (Lead)|
General Disclaim Notice
- The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
- The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
- Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.