Name: M12-A
Brand: binder
SKU: 76 0532 1111 00012-1000

Illustration M12 Female panel mount connector, Contacts: 12, unshielded, single wires, IP68/IP69K, UL 2238, PG 9, Rear mounting — Illustration

3D View M12 Female panel mount connector, Contacts: 12, unshielded, single wires, IP68/IP69K, UL 2238, PG 9, Rear mounting — 3D View

Scale drawing M12 Female panel mount connector, Contacts: 12, unshielded, single wires, IP68/IP69K, UL 2238, PG 9, Rear mounting — Scale drawing

Assembly instructions / Panel cut-out M12 Female panel mount connector, Contacts: 12, unshielded, single wires, IP68/IP69K, UL 2238, PG 9, Rear mounting — Assembly instructions / Panel cut-out

Contact arrangement (Plug-in side) M12 Female panel mount connector, Contacts: 12, unshielded, single wires, IP68/IP69K, UL 2238, PG 9, Rear mounting — Contact arrangement (Plug-in side)

This female panel mount connector with screw locking and a pin count of 12 is according to its protection class IP68/IP69K Dustproof and complete protection against contact. Protection against permanent submersion. Unless otherwise specified, protection up to 1 meter water depth. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -40 °C/85 °C is this unshielded M12-A coded female panel mount connector designed for both severe cold and severe heat. und has the UL approval. Due to the qualified rated voltage of 30 V and the rated current of 1,5 A it is perfectly tuned for its field of application.

Moreless

Part no.	76 0532 1111 00012-1000
Connector design	Female panel mount connector
Coding	A-coded
Wire length	1 m (Other lengths are available on request).
Version	Connector socket straight
Connector locking system	screw
Termination	single wires
Degree of protection	IP68/IP69K
Connection cross-section	0.14 mm² / AWG 26
Temperature range from/to	-40 °C / 85 °C
Mechanical operation	> 100 Mating cycles
Weight (g)	19.91
Customs tariff number	85369010
Country of Origin	DE

Moreless

Rated voltage	30 V
Rated impulse voltage	800 V
Rated current	1.5 A
Insulation resistance	> 10⁸ Ω
Pollution degree	3
Insulating material group	III
EMC compliance	unshielded

Moreless

Housing material	Zinc die-cast nickel-plated
Contact body material	PA black
Contact material	CuSn (bronze)
Contact plating	Au (gold)
REACH SVHC	CAS 7439-92-1 (Lead)
SCIP number	765bc298-8c21-4973-8c38-4a1e918393c3

Moreless

Structure of the wire
Cross section (mm²)	12 x 0.14 mm²
Cross section (AWG)	12 x AWG 26
Wire diameter	1,3 mm
Wire colors	white brown green yellow pink blue red black grey violet grey-pink red-blue
Sheath material	PVC
Wire material	Cu (tinned)
Wire structure	7 x 0.16 mm
Electrical properties
Rated voltage	300 V
Rated impulse voltage	3000 V
Wire resistance	135 Ω/Km (20°C)
Insulation resistance	20.0 MΩ/Km (20 °C)
Thermal properties
Temperature range wire in move from / to (°C)	-10 °C / 105 °C
Temperature range wire fixed from / to (°C)	-30 °C / 105 °C

Moreless

Approvals	UL 2238

Moreless

ETIM 9.0	EC003570

Report error on this page

General Disclaim Notice

The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).
The user must take appropriate safety precautions to ensure that the connector cannot be accidentally disconnected. In addition, the user must ensure that the cable is suitably secured.

Downloads

all (PDF)

Data sheet

Data sheet 76 0532 1111 00012-1000

PDF

download