Part no.: 77 3430 3429 30004-0060
M12/M12 Connecting cable male cable connector - female cable connector, Contacts: 4, unshielded, moulded on the cable, IP69K, UL, TPE, black, 4 x AWG 22, 0.6 m
M12-A, series 763, Automation Technology - Sensors and Actuators
This female cable connector with male cable connector - female cable connector with screw locking and a pin count of 4 is according to its protection class IP68 Dustproof and complete protection against contact. Protection against permanent submersion. Unless otherwise specified, protection up to 1 meter water depth. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -25 °C/90 °C is this unshielded M12-A coded connecting cable male cable connector - female cable connector designed for both severe cold and severe heat. und has the UL approval. Due to the qualified rated voltage of 250 V and the rated current of 4,0 A it is perfectly tuned for its field of application. It complies with the type standard DIN EN 61076-2-101.
General features
MorelessPart no. | 77 3430 3429 30004-0060 |
Connector design | Connecting cable male cable connector - female cable connector |
Type standard | DIN EN 61076-2-101 |
Cable length | 0.6 m (Other lengths are available on request). |
Version | Connecting cable |
Connector locking system | screw |
Termination | moulded on the cable |
Degree of protection | IP69K |
Cross-sectional area | 0.34 mm² / AWG 22 |
Temperature range from/to | -25 °C / 90 °C |
Mechanical operation | > 100 Mating cycles |
Weight (g) | 336 |
Electrical parameters
MorelessRated voltage | 250 V |
Rated impulse voltage | 2500 V |
Rated current | 4.0 A |
Pollution degree | 3 |
Overvoltage category | II |
Insulating material group | II |
EMC compliance | unshielded |
Material
MorelessContact body material | PUR |
Contact material | CuZn (brass) |
Contact plating | Au (gold) |
REACH SVHC |
None (No pollutants) |
SCIP number | SCIP-number not available |
Authorization/approvals
MorelessApprovals | UL |
Classifications
MorelessETIM 9.0 | EC002638 |
Cable data
MorelessStructure of the cable | |
Cable diameter | 5.6 mm |
Cross section | 4 x AWG 22 |
Sheath material | TPE |
Single-lead insulation | PVC |
Single-lead structure | 19 x 0.34 mm |
Cable color | black |
Mechanical properties | |
Bending radius, fixed cable | ≥ 5 x Ø |
Bending radius, moving cable | ≥ 10 x Ø |
Bending cycles | > 10 million |
Thermal properties | |
Temperature range cable in move from/to | -25 °C / 105 °C |
Temperature range cable fixed from/to | -50 °C / 105 °C |
General Disclaim Notice
- The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
- The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
- To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
- The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
- Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
- The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
- To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).
- The protection class specification applies on condition that the four mounting holes are made as blind holes.