Menu
Back
  1. Products
  2. Automation technology - Sensors and actuators
  3. M12-A
  4. M12/M12 Connecting cable male angled connector - female cable connector, Contacts: 12, unshielded, moulded on the cable, IP69K, Ecolab, FDA compliant, Special TPE, grey, 12 x 0.25 mm², Food & Beverage, stainless steel, 2 m
Part no.: 77 3730 3727 40912-0200

M12/M12 Connecting cable male angled connector - female cable connector, Contacts: 12, unshielded, moulded on the cable, IP69K, Ecolab, FDA compliant, Special TPE, grey, 12 x 0.25 mm², Food & Beverage, stainless steel, 2 m

M12-A, series 763, Automation Technology - Sensors and Actuators
Available numbers of contacts
(Standard 1 m and 2 m. Other lengths are available on request.)
Compare product
Downloads
This female cable connector with for food and beverage industry with screw locking and a pin count of 12 is according to its protection class IP69K Dustproof and complete protection against contact and protection against water during high pressure/steam jet cleaning, specific for road vehicles. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -40 °C/105 °C is this unshielded M12-A coded connecting cable für die Lebensmittelindustrie designed for both severe cold and severe heat and has the Ecolab, FDA konform approval. Due to the qualified rated voltage of 30 V and the rated current of 1,5 A it is perfectly tuned for its field of application. It complies with the type standard DIN EN 61076-2-101.
General features
Moreless
Part no. 77 3730 3727 40912-0200
Connector design Connecting cable male angled connector - female cable connector
Type standard DIN EN 61076-2-101
Cable length 2 m (Standard 1 m and 2 m. Other lengths are available on request.)
Version Connecting cable
Connector locking system screw
Termination moulded on the cable
Degree of protection IP69K
Cross-sectional area 0.25 mm² / AWG 28
Temperature range from/to -40 °C / 105 °C
Mechanical operation > 100 Mating cycles
Additional information Food & Beverage
stainless steel
Weight (g) 306.00
Customs tariff number 85444290
Country of Origin DE
Rated voltage 30 V
Rated impulse voltage 800 V
Rated current 1.5 A
Insulation resistance ≥ 1010 Ω
Pollution degree 3
Overvoltage category II
Insulating material group II
EMC compliance unshielded
Housing material PP
Contact body material PP
Contact material CuZn (brass) / CuSn (bronze)
Contact plating Au (gold)
Locking material Stainless steel
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 4326a6f1-d9d9-462f-8802-17bffbec0e6c
Approvals Ecolab, FDA compliant
eCl@ss 11.1 27-06-03-11
ETIM 9.0 EC002638
RoHS Directive 2011/65/EU (EN 50581:2012)
Cable data
Moreless
Structure of the cable
Cable diameter 6.9 mm
Cross section 12 x 0.25 mm²
Sheath material Special TPE
Single-lead insulation modified TPE
Single-lead structure 32 x 0.10 mm
Cable color grey
Mechanical properties
Bending radius, fixed cable ≥ 5 x Ø
Bending radius, moving cable ≥ 10 x Ø
Bending cycles 2 million
Permitted acceleration 5 m/s²
Travel distance, horizontal 5 m
Thermal properties
Temperature range cable in move from/to -25 °C / 105 °C
Temperature range cable fixed from/to -50 °C / 105 °C
Other features
Halogen free yes
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  5. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).
  6. The protection class specification applies on condition that the four mounting holes are made as blind holes.
Downloads
Data sheet
Data sheet 77 3730 3727 40912-0200
PDF
REACH
77 3730 3727 40912-0200
PDF
RoHS
77 3730 3727 40912-0200
PDF
China RoHS
77 3730 3727 40912-0200
PDF
Declaration of conformity, RoHS Directive
Declaration of conformity
RoHS Directive
PDF
UKCA declaration of conformity, UK-RoHS
UKCA declaration of conformity
UK-RoHS
PDF
CAD files
Select required format
M12-A
77 3730 3727 40912-0200