99 0487 12 08 | binder Male cable connector, Contacts: 8, 6.0-8.0 mm, unshielded, screw clamp, IP67, UL

Menu

Menu

Part no.

My Cart

binder USA

Products
Automation technology - Sensors and actuators
M12-A
Male cable connector, Contacts: 8, 6.0-8.0 mm, unshielded, screw clamp, IP67, UL

Illustration 99 0487 12 08 - Male cable connector, Contacts: 8, 6.0-8.0 mm, unshielded, screw clamp, IP67, UL — Illustration

3D View 99 0487 12 08 - Male cable connector, Contacts: 8, 6.0-8.0 mm, unshielded, screw clamp, IP67, UL — 3D View

Component part drawing 99 0487 12 08 - Male cable connector, Contacts: 8, 6.0-8.0 mm, unshielded, screw clamp, IP67, UL — Component part drawing

Scale drawing 99 0487 12 08 - Male cable connector, Contacts: 8, 6.0-8.0 mm, unshielded, screw clamp, IP67, UL — Scale drawing

Assembly instructions 99 0487 12 08 - Male cable connector, Contacts: 8, 6.0-8.0 mm, unshielded, screw clamp, IP67, UL — Assembly instructions

Contact arrangement (Plug-in side) 99 0487 12 08 - Male cable connector, Contacts: 8, 6.0-8.0 mm, unshielded, screw clamp, IP67, UL — Contact arrangement (Plug-in side)

Part no.	99 0487 12 08
Connector design	Male cable connector
Type standard	DIN EN 61076-2-101
Version	Connector pin straight
Connector locking system	screw
Termination	screw clamp
Degree of protection	IP67
Cross-sectional area	max. 0.50 mm² / AWG 20
Cable outlet	6.0-8.0 mm
Temperature range from/to	-40 °C / 85 °C
Mechanical operation	> 100 Mating cycles
Weight (g)	21.20
Customs tariff number	85369010

Rated voltage	30 V
Rated impulse voltage	800 V
Rated current (40 °C)	1.5 A (2 A UL)
Insulation resistance	> 10⁸ Ω
Pollution degree	3
Overvoltage category	II
Insulating material group	III
EMC compliance	unshielded

Housing material	PA
Contact body material	PA
Contact material	CuZn (brass)
Contact plating	Au (gold)
Locking material	Zinc die-cast nickel-plated
REACH SVHC	CAS 96-45-7 (Imidazolidine-2-thione) CAS 7439-92-1 (Lead)
SCIP number	b80a59e9-7b6f-4836-b396-0df3a3d426d5

Approvals	UL

eCl@ss 11.1	27-44-01-02
ETIM 9.0	EC002635

Report error on this page

General Disclaim Notice

The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).

Downloads

Data sheet 99 0487 12 08

CAD files

Select required format