99 3369 100 04 | binder M8-D Male cable connector, Contacts: 4, 4.0-5.5 mm, shieldable, screw clamp, IP67

Menu

Menu

Part no.

My Cart

binder USA

Products
Automation technology - Sensors and actuators
M8-D
M8-D Male cable connector, Contacts: 4, 4.0-5.5 mm, shieldable, screw clamp, IP67

Illustration 99 3369 100 04 - M8-D Male cable connector, Contacts: 4, 4.0-5.5 mm, shieldable, screw clamp, IP67 — Illustration

3D View 99 3369 100 04 - M8-D Male cable connector, Contacts: 4, 4.0-5.5 mm, shieldable, screw clamp, IP67 — 3D View

Component part drawing 99 3369 100 04 - M8-D Male cable connector, Contacts: 4, 4.0-5.5 mm, shieldable, screw clamp, IP67 — Component part drawing

Scale drawing 99 3369 100 04 - M8-D Male cable connector, Contacts: 4, 4.0-5.5 mm, shieldable, screw clamp, IP67 — Scale drawing

Assembly instructions 99 3369 100 04 - M8-D Male cable connector, Contacts: 4, 4.0-5.5 mm, shieldable, screw clamp, IP67 — Assembly instructions

Contact arrangement (Plug-in side) 99 3369 100 04 - M8-D Male cable connector, Contacts: 4, 4.0-5.5 mm, shieldable, screw clamp, IP67 — Contact arrangement (Plug-in side)

Part no.	99 3369 100 04
Connector design	Male cable connector
Version	Connector pin straight
Connector locking system	M8x1
Termination	screw clamp
Degree of protection	IP67
Cross-sectional area	0.14-0.50 mm²
Cable outlet	4.0-5.5 mm
Temperature range from/to	-25 °C / 85 °C
Mechanical operation	> 100 Mating cycles
Weight (g)	15.0
Customs tariff number	85369010

Rated voltage	63 V DC
Rated impulse voltage	1500 V
Rated current (40 °C)	4.0 A
Insulation resistance	> 10⁸ Ω
Pollution degree	3
Overvoltage category	II
Insulating material group	II
EMC compliance	shieldable
Shield connection	Iris type spring

Housing material	PA
Contact body material	PA black
Contact material	CuZn (brass)
Contact plating	Au (gold)
Locking material	CuZn (brass)
REACH SVHC	CAS 7439-92-1 (Lead)

eCl@ss 11.1	27-44-01-02
ETIM 7.0	EC002635

Report error on this page

General Disclaim Notice

The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 40 cNm).

Downloads

Data sheet 99 3369 100 04

CAD files

Select required format