Name: M8
Brand: binder
SKU: 09 3427 86 08

Illustration 09 3427 86 08 - M8 Male panel mount connector, Contacts: 8, unshielded, single wires, IP67, front fastened — Illustration

3D View 09 3427 86 08 - M8 Male panel mount connector, Contacts: 8, unshielded, single wires, IP67, front fastened — 3D View

Scale drawing 09 3427 86 08 - M8 Male panel mount connector, Contacts: 8, unshielded, single wires, IP67, front fastened — Scale drawing

Assembly instructions / Panel cut-out 09 3427 86 08 - M8 Male panel mount connector, Contacts: 8, unshielded, single wires, IP67, front fastened — Assembly instructions / Panel cut-out

Contact arrangement (Plug-in side) 09 3427 86 08 - M8 Male panel mount connector, Contacts: 8, unshielded, single wires, IP67, front fastened — Contact arrangement (Plug-in side)

There is a newer version of this article

Direct comparison old/new version

Automation Technology - Sensors and Actuators--Male panel mount connector_718_3_FS_front_konf

76 6319 1111 00008-0200

M8 Male panel mount connector, Contacts: 8, unshielded, single wires, IP67, UL, front fastened

M8, series 718, Automation Technology - Sensors and Actuators

Details

This male panel mount connector with screw locking and a pin count of 8 is according to its protection class IP67 Dust-tight and has complete protection against contact and protection against temporary immersion. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -40 °C/85 °C is this unshielded M8 male panel mount connector designed for both severe cold and severe heat and has the approval. Due to the qualified rated voltage of 30 V and the rated current of 1,5 A it is perfectly tuned for its field of application. It complies with the type standard DIN EN 61076-2-104.

Moreless

Part no.	09 3427 86 08
Connector design	Male panel mount connector
Type standard	DIN EN 61076-2-104
Wire length	0.2 m (Standard 0.2m. Other lengths are available on request).
Version	Connector pin straight
Connector locking system	screw
Termination	single wires
Degree of protection	IP67
Cross-sectional area	0.14 mm² / AWG 26
Temperature range from/to	-40 °C / 85 °C
Mechanical operation	> 100 Mating cycles
Weight (g)	8.00
Customs tariff number	85369010
Country of Origin	DE

Moreless

Rated voltage	30 V
Rated impulse voltage	800 V
Rated current	1.5 A
Pollution degree	3
Overvoltage category	II
Insulating material group	II
EMC compliance	unshielded

Moreless

Housing material	Zinc die-cast nickel-plated
Contact body material	PA black
Contact material	CuZn (brass)
Contact plating	Au (gold)
REACH SVHC	CAS 7439-92-1 (Lead)
SCIP number	b477300f-aae2-4894-9f01-9b129de00126

Moreless

eCl@ss 11.1	27-44-01-03
ETIM 9.0	EC003569

Report error on this page

General Disclaim Notice

The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.

Downloads

all (PDF)

Data sheet

Data sheet 09 3427 86 08