Part no.: 79 3414 12 03
Snap-In Female angled connector, Contacts: 3, unshielded, PUR, black, 3 x 0.14 mm²
M8, series 718, Automation Technology - Sensors and Actuators
General features
MorelessPart no. | 79 3414 12 03 |
Connector design | Female angled connector |
Type standard | DIN EN 61076-2-104 |
Version | Connector socket angled |
Connector locking system | snap-in |
Weight (g) | 27.00 |
Customs tariff number | 85444290 |
Country of Origin | DE |
Electrical parameters
MorelessRated voltage | 50 V (AC) / 60 V (DC) |
EMC compliance | unshielded |
Material
MorelessHousing material | PUR |
REACH SVHC |
CAS 7439-92-1 (Lead) |
SCIP number | 6e3d24c5-1682-4586-a75e-c6af30153fcb |
Classifications
MorelesseCl@ss 11.1 | 27-06-03-11 |
ETIM 9.0 | EC002638 |
Declarations of conformity
MorelessLow Voltage Directive | 2014/35/EU (EN 60204-1:2018;EN 60529:1991) |
RoHS Directive | 2011/65/EU (EN 50581:2012) |
Cable data
MorelessStructure of the cable | |
Cable diameter | 5.0 mm |
Cross section | 3 x 0.14 mm² |
Sheath material | PUR |
Single-lead insulation | PVC |
Single-lead structure | 7 x 0.25 mm |
Cable color | black |
Electrical properties | |
Conductor resistance | 148 Ω/Km (20°C) |
Mechanical properties | |
Travel distance, horizontal | 2 m/s² -> 3 m |
Thermal properties | |
Temperature range cable in move from/to | -5 °C / 70 °C |
Temperature range cable fixed from/to | -25 °C / 70 °C |
Other features | |
Halogen free | no |
General Disclaim Notice
- The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
- The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
- To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
- The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
- Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
- The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
- To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 40 cNm).
Downloads
Data sheet
Data sheet 79 3414 12 03
download
REACH
79 3414 12 03
download
RoHS
79 3414 12 03
download
China RoHS
79 3414 12 03
download
Declaration of conformity
Low Voltage Directive
download
UKCA declaration of conformity
Electrical Equipment
download
Declaration of conformity
RoHS Directive
download
UKCA declaration of conformity
UK-RoHS
download
CAD files
Select required format