Menu
Back
  1. Products
  2. Automation technology - Sensors and actuators
  3. M8
  4. M8 Male receptacle, Contacts: 4, unshielded, solder, IP65
Part no.: 86 6919 0002 32704

M8 Male receptacle, Contacts: 4, unshielded, solder, IP65

M8, series 718, Automation Technology - Sensors and Actuators
Available numbers of contacts
Compare product
Downloads
This Male receptacle mit snap-in, schrauben Verriegelung and a pin count of 4 is according to its protection class IP65 Dustproof and complete protection against contact. Protected against dust in harmful quantity. Protection against water jets (nozzle) from any angle.. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -40 °C/70 °C is this unshielded M8 Male receptacle designed for both severe cold and severe heat. Due to the qualified rated voltage of 30 V and the rated current of 4,0 A it is perfectly tuned for its field of application. It complies with the type standard DIN EN 61076-2-104.
General features
Moreless
Part no. 86 6919 0002 32704
Alternative part no.: 09 3415 41 04
Notice
Please note that, due to the change from the old to the new order number, there may be deviations in the technical specifications. For questions about product details, please use the ‘Contact Customer Service’ form on the right.
More
Connector design Male receptacle
Type standard DIN EN 61076-2-104
Version Connector pin straight
Connector locking system snap-in, screw
Termination solder
Degree of protection IP65
Cross-sectional area 0.25 mm² / AWG 24
Temperature range from/to -40 °C / 70 °C
Mechanical operation > 100 Mating cycles
Weight (g) 1.45
Customs tariff number 85369010
Country of Origin DE
Rated voltage 30 V
Rated impulse voltage 1500 V
Rated current 4.0 A
Pollution degree 3
Overvoltage category II
Insulating material group II
EMC compliance unshielded
Housing material CuZn (Brass nickel plated)
Contact body material PA
Contact material CuZn (brass)
Contact plating Au (gold)
REACH SVHC CAS-119-47-1 (2,2'-Methylenbis)
CAS 7439-92-1 (Lead)
NK (Nicht klassifiziert)
SCIP number 5a2ca0f9-7d84-44e6-b0ec-bd10e4b0ecff
eCl@ss 11.1 27-44-01-09
ETIM 9.0 EC003569
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  5. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  6. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
  7. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm).
Downloads
Data sheet
Data sheet 86 6919 0002 32704
PDF
REACH
86 6919 0002 32704
PDF
RoHS
86 6919 0002 32704
PDF
China RoHS
86 6919 0002 32704
PDF
CAD files
Select required format
M8
86 6919 0002 32704