Part no.: 99 0649 72 12
Male angled connector, Contacts: 12, 6.0-8.0 mm, unshielded, solder, IP40
Bayonet, series 678
This male angled connector with bayonet locking system and a pin count of 12 is according to its protection class IP40 protected against solid foreign bodies and against access with a wire. No protection against water. It can be used in areas with a pollution degree of 1. In places where there is no or only slight, but non-conductive soiling. The pollution has no influence. With temperatures ranges of -40 °C/85 °C is this unshielded bayonet male angled panel mount connector designed for both severe cold and severe heat. Due to the qualified rated voltage of 60 V and the rated current of 3,0 A it is perfectly tuned for its field of application.
General features
MorelessPart no. | 99 0649 72 12 |
Connector design | Male angled connector |
Version | Connector pin angled |
Connector locking system | Bayonet |
Termination | solder |
Degree of protection | IP40 |
Cross-sectional area | max. 0.25 mm² / AWG 24 |
Cable outlet | 6.0-8.0 mm |
Twistability | not rotatable |
Temperature range from/to | -40 °C / 85 °C |
Mechanical operation | > 500 Mating cycles |
Weight (g) | 12.06 |
Customs tariff number | 85369010 |
Electrical parameters
MorelessRated voltage | 60 V |
Rated impulse voltage | 500 V |
Rated current (40 °C) | 3,0 A |
Insulation resistance | ≥ 10¹⁰ Ω |
Pollution degree | 1 |
Overvoltage category | I |
Insulating material group | III |
EMC compliance | unshielded |
Material
MorelessHousing material | PA |
Contact body material | PBT (UL94 V-0) |
Contact material | CuZn (brass) |
Contact plating | Au (gold) |
REACH SVHC |
CAS 7439-92-1 (Lead) |
SCIP number | 6f2c24f8-3547-441e-8543-dbae78969203 |
Classifications
MorelesseCl@ss 11.1 | 27-44-01-02 |
ETIM 9.0 | EC002635 |
Declarations of conformity
MorelessLow Voltage Directive | 2014/35/EU (EN 60204-1:2018;EN 60529:1991) |
General Disclaim Notice
- The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Downloads