Menu
Back
  1. Products
  2. Miniature connectors
  3. M16 IP67
  4. M16 Male panel mount connector, Contacts: 8 (08-a), unshielded, THT, IP67, UL, AISG compliant, front fastened
Part no.: 09 0173 90 08

M16 Male panel mount connector, Contacts: 8 (08-a), unshielded, THT, IP67, UL, AISG compliant, front fastened

M16 IP67, series 723, Miniature Connectors
Available numbers of contacts
Compare product
Downloads
General features
Moreless
Part no. 09 0173 90 08
Connector design Male panel mount connector
Type standard DIN EN 61076-2-106
Version Connector pin straight
Connector locking system screw
Termination THT
Degree of protection IP67
IP68
Temperature range from/to -40 °C / 95 °C
Mechanical operation > 500 Mating cycles
Weight (g) 13.63
Customs tariff number 85369010
Country of Origin DE
Rated voltage 60 V
Rated impulse voltage 500 V
Rated current 5.0 A
Insulation resistance ≥ 1010 Ω
Pollution degree 1
Overvoltage category I
Insulating material group III
EMC compliance unshielded
Housing material Zinc die-cast nickel-plated
Contact body material PBT (UL94 V-0)
Contact material CuZn (brass)
Contact plating Ag (silver)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number d9c26d70-a406-4d3c-8d9f-b7114ca955c5
Approvals UL, AISG compliant
ETIM 9.0 EC003569
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  5. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
  6. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).
Downloads
Data sheet
Data sheet 09 0173 90 08
PDF
Data sheet, Data sheet 09 0173 90 08
Certificates
UL certificate
PDF, 955.00 KB
REACH
09 0173 90 08
PDF
RoHS
09 0173 90 08
PDF
China RoHS
09 0173 90 08
PDF
CAD files
Select required format
M16 IP67
09 0173 90 08