1. Products
  2. Miniature connectors
  3. M16 IP67
  4. M16 Male cable connector, Contacts: 8 (08-a), 4.1-7.8 mm, shieldable, crimping, IP67, Short version
Part no.: 99 5171 760 08

M16 Male cable connector, Contacts: 8 (08-a), 4.1-7.8 mm, shieldable, crimping, IP67, Short version

M16 IP67, series 423, Miniature Connectors
Compare product
This male cable connector with screw locking and a pin count of 8 (08-a) is according to its protection class IP67 Dust-tight and has complete protection against contact and protection against temporary immersion. It can be used in areas with a pollution degree of 2. In places where light, non-conductive soiling may occur, but temporary conductivity due to condensation must be expected in some cases. With temperatures ranges of -40 °C/100 °C is this shieldable M16 IP67 male cable connector designed for both severe cold and severe heat. Due to the qualified rated voltage of 32 V and the rated current of 5,0 A it is perfectly tuned for its field of application. It complies with the type standard DIN EN 61076-2-106.
General features
Part no. 99 5171 760 08
Connector design Male cable connector
Type standard DIN EN 61076-2-106
Version Connector pin straight
Connector locking system screw
Termination crimping
Degree of protection IP67
Cross-sectional area 0.14-0.75 mm² / AWG 26-20
Cable outlet 4.1-7.8 mm
Temperature range from/to -40 °C / 100 °C
Mechanical operation > 500 Mating cycles
Additional information Short version
Weight (g) 17.63
Customs tariff number 85369010
Country of Origin DE
Rated voltage 32 V
Rated impulse voltage 500 V
Rated current 5.0 A
Pollution degree 2
Overvoltage category II
Insulating material group III
EMC compliance shieldable
Shield connection cable clamp
Housing material CuZn (Brass nickel plated)
Contact body material PBT
Contact plating depending on crimp contact (accessory)
Locking material CuZn (brass)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number d407c1e4-28c5-4349-a0e2-751c6ca9152c
ETIM 9.0 EC002635
Low Voltage Directive 2014/35/EU (EN 60204-1:2018;EN 60529:1991)
RoHS Directive 2011/65/EU (EN 50581:2012)
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  5. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
  6. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm).
Data sheet
Data sheet 99 5171 760 08
99 5171 760 08
99 5171 760 08
China RoHS
99 5171 760 08
Declaration of conformity, Low Voltage Directive
Declaration of conformity
Low Voltage Directive
UKCA declaration of conformity, Electrical Equipment
UKCA declaration of conformity
Electrical Equipment
Declaration of conformity, RoHS Directive
Declaration of conformity
RoHS Directive
UKCA declaration of conformity, UK-RoHS
UKCA declaration of conformity
CAD files
Select required format
M16 IP67
99 5171 760 08