1. Products
  2. Power connectors
  3. RD24 Power
  4. RD24 Female angled connector, Contacts: 6+PE, unshielded, moulded on the cable, IP67, PVC, black, 7 x 0.75 mm², 2 m
Part no.: 79 0238 20 07

RD24 Female angled connector, Contacts: 6+PE, unshielded, moulded on the cable, IP67, PVC, black, 7 x 0.75 mm², 2 m

RD24, series 692, Power Connectors
Available numbers of contacts
Compare product
This female angled connector with screw locking and a pin count of 6+PE is according to its protection class IP67 Dust-tight and has complete protection against contact and protection against temporary immersion. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -25 °C/80 °C is this unshielded RD24 female angled panel mount connector designed for both severe cold and severe heat. Due to the qualified rated voltage of 250 V and the rated current of 8,0 A it is perfectly tuned for its field of application.
General features
Part no. 79 0238 20 07
Connector design Female angled connector
Cable length 2 m (Standard 2 m and 5 m. Other lengths are available on request.)
Version Connector socket angled
Connector locking system screw
Termination moulded on the cable
Degree of protection IP67
Cross-sectional area 0.75 mm² / AWG 18
Temperature range from/to -25 °C / 80 °C
Mechanical operation > 500 Mating cycles
Weight (g) 312.00
Customs tariff number 85444290
Country of Origin DE
Rated voltage 250 V
Rated impulse voltage 4000 V
Rated current 8.0 A
Insulation resistance ≥ 1010 Ω
Pollution degree 3
Overvoltage category III
Insulating material group III
EMC compliance unshielded
Contact body material PA12
Contact material CuZn (brass)
Contact plating Ag (silver)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number f61e09bd-2053-4f4b-9b7b-aa5148038fef
eCl@ss 11.1 27-06-03-11
ETIM 9.0 EC002638
Low Voltage Directive 2014/35/EU (EN 60204-1:2018;EN 60529:1991)
RoHS Directive 2011/65/EU (EN 50581:2012)
Cable data
Structure of the cable
Cross section 7 x 0.75 mm²
Sheath material PVC
Single-lead insulation PVC
Single-lead structure 24 x 0.20 mm
Cable color black
Thermal properties
Temperature range cable in move from/to -5 °C / 80 °C
Temperature range cable fixed from/to -20 °C / 80 °C
Other features
Halogen free no
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  5. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm).
Data sheet
Data sheet 79 0238 20 07
79 0238 20 07
79 0238 20 07
China RoHS
79 0238 20 07
Declaration of conformity, Low Voltage Directive
Declaration of conformity
Low Voltage Directive
UKCA declaration of conformity, Electrical Equipment
UKCA declaration of conformity
Electrical Equipment
Declaration of conformity, RoHS Directive
Declaration of conformity
RoHS Directive
UKCA declaration of conformity, UK-RoHS
UKCA declaration of conformity
CAD files
Select required format
RD24 Power
79 0238 20 07