Menu
Back
  1. Products
  2. Subminiature connectors
  3. Bayonet IP40
  4. Bayonet Male panel mount connector, Contacts: 8, unshielded, solder, IP40
Part no.: 09 9481 00 08

Bayonet Male panel mount connector, Contacts: 8, unshielded, solder, IP40

Bayonet, series 710, Subminiature Connectors
Available numbers of contacts
Compare product
Downloads
This male panel mount connector with bayonet locking system and a pin count of 8 is according to its protection class IP40 protected against solid foreign bodies and against access with a wire. No protection against water. It can be used in areas with a pollution degree of 1. In places where there is no or only slight, but non-conductive soiling. The pollution has no influence. With temperatures ranges of -40 °C/85 °C is this unshielded bayonet male panel mount connector designed for both severe cold and severe heat. Due to the qualified rated voltage of 125 V and the rated current of 1,0 A it is perfectly tuned for its field of application.
General features
Moreless
Part no. 09 9481 00 08
Connector design Male panel mount connector
Version Connector pin straight
Connector locking system Bayonet
Termination solder
Degree of protection IP40
Cross-sectional area 0.14 mm² / AWG 26
Temperature range from/to -40 °C / 85 °C
Mechanical operation > 500 Mating cycles
Weight (g) 1.80
Customs tariff number 85369010
Country of Origin DE
Rated voltage 125 V
Rated impulse voltage 1500 V
Rated current 1.0 A
Insulation resistance ≥ 1010 Ω
Pollution degree 1
Overvoltage category II
Insulating material group III
EMC compliance unshielded
Housing material PA
Contact body material PA (UL94 V-0)
Contact material CuZn (brass)
Contact plating Au (gold)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 29c958e6-3fef-4134-a781-2bd98ba2e88f
eCl@ss 11.1 27-44-01-09
ETIM 9.0 EC003569
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  5. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
Downloads
Data sheet
Data sheet 09 9481 00 08
PDF
REACH
09 9481 00 08
PDF
RoHS
09 9481 00 08
PDF
China RoHS
09 9481 00 08
PDF
CAD files
Select required format
Bayonet IP40
09 9481 00 08