1. Products
  2. Automation technology - Voltage and Power Supply
  3. 7/8"
  4. 7/8" Female cable connector, Contacts: 4, unshielded, moulded on the cable, IP68, UL, PUR, black, 4 x 1.50 mm², 2 m
Part no.: 77 1430 0000 50004-0200

7/8" Female cable connector, Contacts: 4, unshielded, moulded on the cable, IP68, UL, PUR, black, 4 x 1.50 mm², 2 m

7/8", series 870, Automation Technology - Voltage and Power Supply
Available numbers of contacts
(Standard 2 m and 5 m. Other lengths are available on request.)
Compare product
This female cable connector with screw locking and a pin count of 4 is according to its protection class IP68 Dustproof and complete protection against contact. Protection against permanent submersion. Unless otherwise specified, protection up to 1 meter water depth. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -25 °C/80 °C is this unshielded 7/8" female cable connector designed for both severe cold and severe heat. und has the UL approval. Due to the qualified rated voltage of 300 V (600 V UL) and the rated current of 10,0 A it is perfectly tuned for its field of application.
General features
Part no. 77 1430 0000 50004-0200
Connector design Female cable connector
Cable length 2 m (Standard 2 m and 5 m. Other lengths are available on request.)
Version Connector socket straight
Connector locking system screw
Termination moulded on the cable
Degree of protection IP68
Cross-sectional area 1.50 mm² / AWG 16
Temperature range from/to -25 °C / 80 °C
Mechanical operation > 100 Mating cycles
Weight (g) 562.00
Customs tariff number 85444290
Rated voltage 300 V (600 V UL)
Rated impulse voltage 2500 V
Rated current 10.0 A
Pollution degree 3
Overvoltage category II
Insulating material group I
EMC compliance unshielded
Housing material PUR
Contact body material PUR
Contact material CuZn (brass)
Contact plating Au (gold)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 966c2df7-3351-4ba9-b33f-31105f61a830
eCl@ss 11.1 27-06-03-11
ETIM 9.0 EC002638
Low Voltage Directive 2014/35/EU (EN 60529:1991;EN 60204-1:2018)
Cable data
Structure of the cable
Cable diameter 8.0 mm
Cross section 4 x 1.50 mm²
Sheath material PUR
Single-lead insulation PP
Single-lead structure 84 x 0.15 mm
Cable color black
Electrical properties
Conductor resistance 13.3 Ω/Km (20°C)
Mechanical properties
Bending radius, fixed cable ≥ 7.5 x Ø
Bending radius, moving cable ≥ 10 x Ø
Bending cycles 5 million
Permitted acceleration 5 m/s²
Travel distance, horizontal 20 m
Travel speed ≤ 300 m/min
Thermal properties
Temperature range cable in move from/to -30 °C / 80 °C
Temperature range cable fixed from/to -50 °C / 80 °C
Other features
Halogen free yes
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
  4. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  5. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  6. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  7. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
  8. To lock the cable connector to the device connector, we recommend tightening the threaded ring to 1.5 Nm. A suitable torque wrench is available as an accessory (order no. 07 0082 000).
Data sheet
Data sheet 77 1430 0000 50004-0200
Data sheet, Data sheet 77 1430 0000 50004-0200
UL certificate
PDF, 280.61 KB
77 1430 0000 50004-0200
77 1430 0000 50004-0200
China RoHS
77 1430 0000 50004-0200
Declaration of conformity, Low Voltage Directive
Declaration of conformity
Low Voltage Directive
UKCA declaration of conformity, Electrical Equipment
UKCA declaration of conformity
Electrical Equipment
CAD files
Select required format
77 1430 0000 50004-0200