99 3379 00 03 | binder M8 Male cable connector, Contacts: 3, 3.5-5.0 mm, unshielded, solder, IP67, UL

Menu

Menu

Part no.

My Cart

binder USA

Products
Automation technology - Sensors and actuators
M8
M8 Male cable connector, Contacts: 3, 3.5-5.0 mm, unshielded, solder, IP67, UL

Illustration 99 3379 00 03 - M8 Male cable connector, Contacts: 3, 3.5-5.0 mm, unshielded, solder, IP67, UL — Illustration

3D View 99 3379 00 03 - M8 Male cable connector, Contacts: 3, 3.5-5.0 mm, unshielded, solder, IP67, UL — 3D View

Component part drawing 99 3379 00 03 - M8 Male cable connector, Contacts: 3, 3.5-5.0 mm, unshielded, solder, IP67, UL — Component part drawing

Scale drawing 99 3379 00 03 - M8 Male cable connector, Contacts: 3, 3.5-5.0 mm, unshielded, solder, IP67, UL — Scale drawing

Assembly instructions 99 3379 00 03 - M8 Male cable connector, Contacts: 3, 3.5-5.0 mm, unshielded, solder, IP67, UL — Assembly instructions

Contact arrangement (Plug-in side) 99 3379 00 03 - M8 Male cable connector, Contacts: 3, 3.5-5.0 mm, unshielded, solder, IP67, UL — Contact arrangement (Plug-in side)

Part no.	99 3379 00 03
Connector design	Male cable connector
Version	Connector pin straight
Connector locking system	screw
Termination	solder
Degree of protection	IP67
Cross-sectional area	0.25 mm² / AWG 24
Cable outlet	3.5-5.0 mm
Temperature range from/to	-40 °C / 85 °C
Mechanical operation	> 100 Mating cycles
Weight (g)	8.11
Customs tariff number	85369010

Rated voltage	30 V
Rated impulse voltage	1500 V
Rated current (40 °C)	4.0 A
Pollution degree	3
Overvoltage category	III
Insulating material group	III
EMC compliance	unshielded

Housing material	PA
Contact body material	PA
Contact material	CuZn (brass)
Contact plating	Au (gold)
Locking material	CuZn (brass)
REACH SVHC	CAS 7439-92-1 (Lead)
SCIP number	018b9312-4ead-47cd-9708-6396b146a3d2

Approvals	UL

eCl@ss 11.1	27-44-01-02
ETIM 7.0	EC002635

Low Voltage Directive	2014/35/EU (EN 60204-1:2018;EN 60529:1991)

Report error on this page

General Disclaim Notice

The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm).

Downloads

Data sheet 99 3379 00 03

Declaration of conformity

Low Voltage Directive

UKCA declaration of conformity

Electrical Equipment

CAD files

Select required format