Part no.: 99 1721 000 12
Snap-In Male cable connector, Contacts: 12, 6.0-8.0 mm, unshielded, solder, IP54
ELC, series 570, Connectors for medical applications
This male cable connector with snap-in locking system and a pin count of 12 is according to its protection class IP54 Geschützt gegen Staub in schädigenThis Menge. Vollständiger Schutz gegen Berührung. Schutz gegen allseitiges Spritzwasser. It can be used in areas with a pollution degree of 2. In places where light, non-conductive soiling may occur, but temporary conductivity due to condensation must be expected in some cases. With temperatures ranges of -25 °C/85 °C is this unshielded ELC male cable connector designed for both severe cold and severe heat. Due to the qualified rated voltage of 150 V and the rated current of 2,0 A it is perfectly tuned for its field of application.
General features
MorelessPart no. | 99 1721 000 12 |
Connector design | Male cable connector |
Version | Connector pin straight |
Connector locking system | snap-in |
Termination | solder |
Degree of protection | IP54 |
Cross-sectional area | max. 0.25 mm² / AWG 24 |
Cable outlet | 6.0-8.0 mm |
Temperature range from/to | -25 °C / 85 °C |
Mechanical operation | > 5000 Mating cycles |
Weight (g) | 17.26 |
Customs tariff number | 85369010 |
Country of Origin | DE |
Electrical parameters
MorelessRated voltage | 150 V |
Rated impulse voltage | 1500 V |
Rated current | 2.0 A |
Insulation resistance | ≥ 1010 Ω |
Pollution degree | 2 |
Overvoltage category | II |
Insulating material group | II |
EMC compliance | unshielded |
Material
MorelessHousing material | PA |
Contact body material | PA |
Contact material | CuZn (brass) |
Contact plating | Au (gold) |
REACH SVHC |
CAS 96-45-7 (Imidazolidine-2-thione) CAS 7439-92-1 (Lead) |
SCIP number | 1bf4a6fe-8e5c-4d75-b086-9942eb310295 |
Classifications
MorelesseCl@ss 11.1 | 27-44-01-02 |
ETIM 9.0 | EC002635 |
Declarations of conformity
MorelessLow Voltage Directive | 2014/35/EU (EN 60204-1:2018;EN 60529:1991) |
General Disclaim Notice
- The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
- Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
Downloads