Menu
Back
  1. Products
  2. Power connectors
  3. Bayonet IP40 Power
  4. Bayonet Male cable connector, Contacts: 12, 5.0-8.0 mm, shieldable, solder, IP40
Part no.: 09 0467 00 12

Bayonet Male cable connector, Contacts: 12, 5.0-8.0 mm, shieldable, solder, IP40

Bayonet, series 690, Power Connectors
Available numbers of contacts
Compare product
Downloads
This male cable connector with bayonet locking system and a pin count of 12 is according to its protection class IP40 protected against solid foreign bodies and against access with a wire. No protection against water. It can be used in areas with a pollution degree of 1. In places where there is no or only slight, but non-conductive soiling. The pollution has no influence. With temperatures ranges of -40 °C/85 °C is this shieldable bayonet male cable connector designed for both severe cold and severe heat. Due to the qualified rated voltage of 125 V and the rated current of 5,0 A it is perfectly tuned for its field of application.
General features
Moreless
Part no. 09 0467 00 12
Connector design Male cable connector
Version Connector pin straight
Connector locking system Bayonet
Termination solder
Degree of protection IP40
Cross-sectional area 0.75 mm² / AWG 18
Cable outlet 5.0-8.0 mm
Temperature range from/to -40 °C / 85 °C
Mechanical operation > 50 Mating cycles
Weight (g) 38.84
Customs tariff number 85369010
Country of Origin DE
Rated voltage 125 V
Rated impulse voltage 1500 V
Rated current 5.0 A
Insulation resistance ≥ 1010 Ω
Pollution degree 1
Overvoltage category II
Insulating material group III
EMC compliance shieldable
Shield connection Cable clamp and soldering lug
Housing material GD-AL eloxiert
Contact body material PET (UL94 V-0)
Contact material CuZn (brass)
Contact plating CuSnZn (Optalloy)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 9dce679f-557e-4669-bcc2-3a230f94cff0
eCl@ss 11.1 27-44-01-09
ETIM 9.0 EC003569
Low Voltage Directive 2014/35/EU (EN 60204-1:2018;EN 60529:1991)
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
Downloads
Data sheet
Data sheet 09 0467 00 12
PDF
REACH
09 0467 00 12
PDF
RoHS
09 0467 00 12
PDF
China RoHS
09 0467 00 12
PDF
Declaration of conformity, Low Voltage Directive
Declaration of conformity
Low Voltage Directive
PDF
UKCA declaration of conformity, Electrical Equipment
UKCA declaration of conformity
Electrical Equipment
PDF
CAD files
Select required format
Bayonet IP40 Power
09 0467 00 12