Menu
Back
  1. Products
  2. Subminiature connectors
  3. Push-Pull IP67
  4. Push Pull Female panel mount connector, Contacts: 3, shieldable, solder, IP67, front fastened
Part no.: 09 4908 081 03

Push Pull Female panel mount connector, Contacts: 3, shieldable, solder, IP67, front fastened

Push-Pull, series 430, Subminiature Connectors
Available numbers of contacts
Compare product
Downloads
This female panel mount connector mit Push-Pull Verriegelung and a pin count of 3 is according to its protection class IP67 Dust-tight and has complete protection against contact and protection against temporary immersion. It can be used in areas with a pollution degree of 2. In places where light, non-conductive soiling may occur, but temporary conductivity due to condensation must be expected in some cases. With temperatures ranges of -40 °C/85 °C is this shieldable Push-Pull female panel mount connector designed for both severe cold and severe heat. Due to the qualified rated voltage of 125 V and the rated current of 4,0 A it is perfectly tuned for its field of application.
General features
Moreless
Part no. 09 4908 081 03
Connector design Female panel mount connector
Version Connector socket straight
Connector locking system Push-Pull
Termination solder
Degree of protection IP67
Cross-sectional area 0.25 mm² / AWG 24
Temperature range from/to -40 °C / 85 °C
Mechanical operation > 500 Mating cycles
Weight (g) 10.11
Customs tariff number 85369010
Country of Origin DE
Rated voltage 125 V
Rated impulse voltage 1500 V
Rated current 4.0 A
Pollution degree 2
Overvoltage category I
Insulating material group II
EMC compliance shieldable
Shield connection Shield on the housing
Contact body material PUR/PA
Contact material CuSn (bronze)
Contact plating Au (gold)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 14cab1e6-b17b-468f-af79-36360d143403
eCl@ss 11.1 27-44-01-09
ETIM 9.0 EC003569
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  5. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  6. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
Downloads
Data sheet
Data sheet 09 4908 081 03
PDF
REACH
09 4908 081 03
PDF
RoHS
09 4908 081 03
PDF
China RoHS
09 4908 081 03
PDF
CAD files
Select required format
Push-Pull IP67
09 4908 081 03