Menu
Back
  1. Products
  2. Automation technology - Voltage and Power Supply
  3. M12-K
  4. M12 Male panel mount connector, Contacts: 4+PE, unshielded, single wires, IP68, M16x1.5, UL in preparation
Part no.: 09 0701 37 05

M12 Male panel mount connector, Contacts: 4+PE, unshielded, single wires, IP68, M16x1.5, UL in preparation

M12-K, series 824, Automation Technology - Voltage and Power Supply
Compare product
Downloads
General features
Moreless
Part no. 09 0701 37 05
Connector design Male panel mount connector
Wire length 0.2 m
Version Connector pin straight
Connector locking system screw
Termination single wires
Degree of protection IP68
Cross-sectional area AWG 14
Temperature range from/to -40 °C / 85 °C
Mechanical operation > 100 Mating cycles
Additional information UL in preparation
Weight (g) 49.64
Customs tariff number 85369010
Country of Origin DE
Rated voltage 630 V
Rated impulse voltage 6000 V
Rated impulse voltage UL 6000 V
Rated current 12.0 A
Insulation resistance > 1010 Ω
Pollution degree 3
Overvoltage category III
Insulating material group I
EMC compliance unshielded
Housing material Zinc die-cast nickel-plated
Contact body material PA
Contact material CuZn (brass)
Contact plating Au (gold)
REACH SVHC None (No pollutants)
SCIP number SCIP-number not available
ETIM 9.0 EC003569
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  5. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  6. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
  7. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).
  8. In the case of cable connectors with a metal threaded ring, it is imperative to ensure a connection with the PE protective contact of the appliance connector. Connecting cables between appliance connectors that are not connected to the PE contact are not permitted. The user must ensure a continuous connection of the protective earth conductor.
M12-K
09 0701 37 05