Part no.: 77 0679 0000 50505-0500
M12 Male cable connector, Contacts: 4+PE, unshielded, moulded on the cable, IP68, PUR, black, 5 x 2,50 mm², UL in preparation, 5 m
M12-K, series 824, Automation Technology - Voltage and Power Supply
General features
Moreless| Part no. | 77 0679 0000 50505-0500 |
| Connector design | Male cable connector |
| Cable length | 5 m (Standard 2 m and 5 m. Other lengths are available on request.) |
| Version | Connector pin straight |
| Connector locking system | screw |
| Termination | moulded on the cable |
| Degree of protection | IP68 |
| Cross-sectional area | 2.50 mm² / AWG 14 |
| Temperature range from/to | -40 °C / 90 °C |
| Mechanical operation | > 100 Mating cycles |
| Additional information | UL in preparation |
| Weight (g) | 0.00 |
| Customs tariff number | 85444290 |
| Country of Origin | DE |
Electrical parameters
Moreless| Rated voltage | 630 V |
| Rated impulse voltage | 6000 V |
| Rated current | 16.0 A |
| Insulation resistance | > 1010 Ω |
| Pollution degree | 3 |
| Overvoltage category | III |
| Insulating material group | I |
| EMC compliance | unshielded |
Material
Moreless| Housing material | PA |
| Contact body material | PA |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Locking material | CuZn (brass) |
| REACH SVHC |
None (No pollutants) |
| SCIP number | SCIP-number not available |
Cable data
Moreless| Structure of the cable | |
| Cable diameter | 9.7 mm |
| Cross section | 5 x 2,50 mm² |
| Sheath material | PUR |
| Single-lead insulation | PP |
| Single-lead structure | 141 x 0,15 mm |
| Cable color | black |
| Electrical properties | |
| Conductor resistance | 8 Ω/Km (20°C) |
| Mechanical properties | |
| Bending radius, fixed cable | min. 5 x Ø |
| Bending radius, moving cable | min. 10 x Ø |
| Bending cycles | > 4 million |
| Permitted acceleration | 10 m/s² |
| Travel distance, horizontal | 5 m/s² -> 5 m |
| Travel distance, vertical | 5 m/s² -> 5 m |
| Thermal properties | |
| Temperature range cable in move from/to | -30 °C / 90 °C |
| Temperature range cable fixed from/to | -50 °C / 90 °C |
| Other features | |
| Halogen free | yes |
General Disclaim Notice
- The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
- The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
- To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
- Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
- To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).
- In the case of cable connectors with a metal threaded ring, it is imperative to ensure a connection with the PE protective contact of the appliance connector. Connecting cables between appliance connectors that are not connected to the PE contact are not permitted. The user must ensure a continuous connection of the protective earth conductor.
