Menu
Back
  1. Products
  2. Automation technology - Sensors and actuators
  3. M12-A
  4. M12/M12 Connecting cable 2 male cable connectors, Contacts: 8, shielded, moulded on the cable, IP67, Ethernet CAT5e, TPE, black, 4 x 2 x AWG 24, 0.3 m
Part no.: 77 3529 3529 64708-0030

M12/M12 Connecting cable 2 male cable connectors, Contacts: 8, shielded, moulded on the cable, IP67, Ethernet CAT5e, TPE, black, 4 x 2 x AWG 24, 0.3 m

M12-A, series 763, Automation Technology - Sensors and Actuators
(Other lengths are available on request).
Compare product
Downloads
This female cable connector with 2 male cable connectors with screw locking and a pin count of 8 is according to its protection class IP67 Dust-tight and has complete protection against contact and protection against temporary immersion. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -25 °C/90 °C is this shielded M12-A coded connecting cable 2 male cable connector designed for both severe cold and severe heat. Due to the qualified rated voltage of 30 V and the rated current of 2,0 A it is perfectly tuned for its field of application. It complies with the type standard DIN EN 61076-2-101.
General features
Moreless
Part no. 77 3529 3529 64708-0030
Connector design Connecting cable 2 male cable connectors
Type standard DIN EN 61076-2-101
Cable length 0.3 m (Other lengths are available on request).
Version Connecting cable
Connector locking system screw
Termination moulded on the cable
Degree of protection IP67
Cross-sectional area 0.25 mm² / AWG 24
Temperature range from/to -25 °C / 90 °C
Mechanical operation > 100 Mating cycles
Weight (g) 19
Rated voltage 30 V
Rated impulse voltage 800 V
Rated current 2.0 A
Pollution degree 3
Overvoltage category II
Insulating material group II
EMC compliance shielded
Contact body material PUR
Contact material CuZn (brass)
Contact plating Au (gold)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number SCIP-number not available
ETIM 9.0 EC002638
Cable data
Moreless
Structure of the cable
Cable type Ethernet CAT5e
Cable diameter 7.6 mm
Cross section 4 x 2 x AWG 24
Sheath material TPE
Single-lead insulation HDPE
Single-lead structure 7 x 32 mm
Cable color black
Mechanical properties
Bending radius, fixed cable ≥ 5 x Ø
Bending radius, moving cable ≥ 10 x Ø
Bending cycles > 10 million
Permitted acceleration max. 2 m/s²
Travel speed ≤ 200 m/min (5 m horizontal distance)
Thermal properties
Temperature range cable in move from/to -40 °C / 80 °C
Temperature range cable fixed from/to -40 °C / 80 °C
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).
  5. The protection class specification applies on condition that the four mounting holes are made as blind holes.
Downloads
Data sheet
Data sheet 77 3529 3529 64708-0030
PDF
REACH
77 3529 3529 64708-0030
PDF
RoHS
77 3529 3529 64708-0030
PDF
China RoHS
77 3529 3529 64708-0030
PDF
CAD files
Select required format
M12-A
77 3529 3529 64708-0030