Name: M8
Brand: binder
SKU: 79 3409 52 03

Illustration 79 3409 52 03 - Snap-In Male cable connector, unshielded, moulded on the cable, 2 m — Illustration

3D View 79 3409 52 03 - Snap-In Male cable connector, unshielded, moulded on the cable, 2 m — 3D View

Scale drawing 79 3409 52 03 - Snap-In Male cable connector, unshielded, moulded on the cable, 2 m — Scale drawing

Contact arrangement (Plug-in side) 79 3409 52 03 - Snap-In Male cable connector, unshielded, moulded on the cable, 2 m — Contact arrangement (Plug-in side)

This male cable connector with snap-in locking system and a pin count of 3 is according to its protection class IP65 Dustproof and complete protection against contact. Protected against dust in harmful quantity. Protection against water jets (nozzle) from any angle.. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -40 °C/70 °C is this unshielded M8 male cable connector designed for both severe cold and severe heat. Due to the qualified rated voltage of 60 V and the rated current of 4,0 A it is perfectly tuned for its field of application. It complies with the type standard DIN EN 61076-2-104.

Moreless

Part no.	79 3409 52 03
Connector design	Male cable connector
Type standard	DIN EN 61076-2-104
Cable length	2 m (Standard 2 m and 5 m. Other lengths are available on request.)
Version	Connector pin straight
Termination	moulded on the cable
Cross-sectional area	AWG 24
Weight (g)	57.00
Customs tariff number	85444290
Country of Origin	DE

Moreless

Rated voltage	60 V
Rated impulse voltage	1500 V
Rated current	4.0 A
Insulating material group	II
EMC compliance	unshielded

Moreless

REACH SVHC	CAS 7439-92-1 (Lead)
SCIP number	4f2aa233-2b36-4037-94bf-d2f9dcd5c515

Moreless

eCl@ss 11.1	27-06-03-11
ETIM 9.0	EC002638

Moreless

Low Voltage Directive	2014/35/EU (EN 60204-1:2018;EN 60529:1991)
RoHS Directive	2011/65/EU (EN 50581:2012)

Moreless

Structure of the cable
Single-lead insulation	PVC
Electrical properties
Conductor resistance	72 Ω/Km (20°C)
Other features
Halogen free	no

Report error on this page

General Disclaim Notice

The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 40 cNm).

Downloads

all (PDF)

Data sheet

Data sheet 79 3409 52 03