Menu
Back
  1. Products
  2. Subminiature connectors
  3. Snap-in IP40
  4. Snap-In Female angled connector, Contacts: 5, unshielded, moulded on the cable, IP67, PVC, black, 5 x 0.25 mm², 2 m
Part no.: 79 9006 72 05

Snap-In Female angled connector, Contacts: 5, unshielded, moulded on the cable, IP67, PVC, black, 5 x 0.25 mm², 2 m

Snap-In IP40, series 709, Subminiature Connectors
(Standard 2 m and 5 m. Other lengths are available on request.)
Compare product
Downloads
This female angled connector with snap-in locking system and a pin count of 5 is according to its protection class IP67 Dust-tight and has complete protection against contact and protection against temporary immersion. It can be used in areas with a pollution degree of 1. In places where there is no or only slight, but non-conductive soiling. The pollution has no influence. With temperatures ranges of -25 °C/70 °C is this unshieldede Snap-In IP40 female angled panel mount connector designed for both severe cold and severe heat. Due to the qualified rated voltage of 60 V and the rated current of 3,0 A it is perfectly tuned for its field of application.
General features
Moreless
Part no. 79 9006 72 05
Connector design Female angled connector
Cable length 2 m (Standard 2 m and 5 m. Other lengths are available on request.)
Connector locking system snap-in
Termination moulded on the cable
Degree of protection IP67
Cross-sectional area 0.25 mm² / AWG 24
Temperature range from/to -25 °C / 70 °C
Mechanical operation > 500 Mating cycles
Weight (g) 80.00
Customs tariff number 85444290
Country of Origin DE
Rated voltage 60 V
Rated impulse voltage 800 V
Rated current 3,0 A
Pollution degree 1
Overvoltage category II
Insulating material group III
EMC compliance unshielded
Contact body material PA
Contact material CuSn (bronze)
Contact plating Au (gold)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 66b2990c-94ba-401a-abf5-5801f496bec3
eCl@ss 11.1 27-06-03-11
ETIM 9.0 EC002638
Cable data
Moreless
Structure of the cable
Cable diameter 5.0 mm
Cross section 5 x 0.25 mm²
Sheath material PVC
Single-lead insulation PVC
Single-lead structure 14 x 0.15 mm
Cable color black
Electrical properties
Conductor resistance 79.9 Ω/Km (20°C)
Mechanical properties
Bending radius, fixed cable 5 x Ø
Bending radius, moving cable ≥ 10 x Ø
Thermal properties
Temperature range cable in move from/to -5 °C / 70 °C
Temperature range cable fixed from/to -25 °C / 70 °C
Other features
Halogen free no
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
79 9006 72 05